Loading ...
Loading ...
Loading ...
8
1. Plug the power supply cord into a wall outlet.
2. Set the thermostat to MAX (full clockwise turn).
3. Turn On the unit by selecting HIGH / LOW or the FAN ONLY setting from the
Power Settings Control Knob.
4. Select a thermostat setting. Ambient temperature is regulated by adjusting the
thermostat to a desired position. To set, allow the unit to operate and warm up the
room. When the desired temperature is reached, turn the control knob
counterclockwise just until the heater turns off. This is your ideal setting. The
heater will start automatically when the room temperature drops below this set
point, and will turn off when the set point is reached.
5. To switch off the heater, turn the Setting Control Knob to the OFF position.
Always unplug the heater when it is not in use
.
6. This heater includes an overheat protection system that shuts off the unit
when parts of the heater get excessively hot.
Note: There may be a trace of smoke or odor when the unit is first operated. Do
not be alarmed: this indicates that a drop of oil fell on the interior coils during
the manufacturing process. It will evaporate quickly and should not recur.
OPERATING INSTRUCTIONS
Loading ...
Loading ...
Loading ...