Loading ...
Loading ...
Loading ...
Using for the first time
28
Setting the rinse aid dosage
You can adjust the rinse aid dosage for
best results.
The rinse aid dosage can be set from 0
to 6ml.
3ml is the factory default setting.
If spots appear on crockery and
glassware:
- Increase the rinse aid dosage.
If clouding or smearing appears on
crockery and glassware:
- Decrease the rinse aid dosage.
Switch the dishwasher off with the
button, if it is switched on.
Press the Start button in and, whilst
holding it in, switch the dishwasher
on using the button.
Keep the Start button pressed in for
at least 4seconds until the Start
indicator light comes on.
If this does not happen, start the
procedure from the beginning again.
Press the programme selection
button 3 times.
The left programme indicator light will
flash rapidly 3 times at intervals.
The dosage set will appear in the
display after .
will start flashing in the display.
Setting3 is set.
Select required setting with the Start
button.
The setting increases each time you
press the button. When the highest
value is reached, the setting starts
again from the beginning.
The setting is now stored in memory.
Switch the dishwasher off with the
button.
Loading ...
Loading ...
Loading ...