Loading ...
Loading ...
Loading ...
Installing Grill Head
1. Remove grill head unit from carton, then place onto
cart from above as shown on diagram (below).
CAUTION!! Head unit is heavy. To avoid injury, we
strongly recommend 2 or more persons for this
step.
3. Align screw holes located on the outside of the grill.
(Fig.11)
3. Attach the grill head to right side panel using (4) 1/4 x
3/8" Phillips head screws with (4) 1/4" lock washers.
(Fig.12)
4. Use (2) 5/32 x 3/8" Phillips head screws and (2) 5/32"
nuts with (2) 5/32" flat washers to attach the side burner
heat shield and tank heat shield together. Use (3) 5/32
x 3/8" Phillips head screws with (3) 5/32" flat washers,
(1) 5/32 x 1-1/2" Phillips head screw and (1) 5/32" nut
with 5/32" flat washer to attach the shield assembly to
the leg and firebox bottom. (Fig.13)
Figure 12
Figure 11
\,' Tank heat shield
hie]d
Figure 13
10
Loading ...
Loading ...
Loading ...