Loading ...
Loading ...
Loading ...
2
1SAFETY AND WARNINGS
IMPORTANT!
It is very important for the installer to follow the instructions in this installation guide
to ensure proper installation and operation of the appliance. Ensure that you read the
installation guide thoroughly and understand all information.
The water connection to your Ice and water appliance must be installed by an
authorized plumber or Fisher & Paykel trained and supported service technician
andcomply with all state and local laws.
Installation and use MUST comply with all state and local plumbing codes.
Checkwithyour local public works department for plumbing codes.
You must follow their guidelines as you install the water filtration system.
To avoid serious illness or death, only connect your water filter to safe drinking water.
The water filter cartridge needs to be changed when the replacement indicator icon
illuminates. This will happen every 6 months.
If the water filtration system has been allowed to freeze, replace filter cartridge.
Failureto replace the disposable filter at recommended intervals may lead to reduced
filter performance and failure of the filter, causing property damage from water leakage
or flooding.
In cases of excessively reduced filter life—we recommend that you consult a local
plumber or your water supplier for advice on suitable filtration requirements for the
water supplied to your home.
Filter replacement is the consumer’s responsibility and will not be covered by the
warranty except in the case of faulty parts or materials within the filter cartridge.
If the water has not created ice for some time or ice has an unpleasant taste or odor
dispose of ice and refer to the flushing instructions detailed in the installation section
of this user guide/installation guide. If unpleasant taste or odor persists, you may wish
to fit a new filter cartridge.
Use new tubing supplied with the appliance. DO NOT reuse old tubing from old water
and ice connections.
Your water filtration system can withstand up to 120psi (827kPa) of water pressure.
Ensure the supplied pressure reducing valve is installed before installing the water
filtration system. DO NOT install if water pressure exceeds 120psi (827kPa).
To reduce the risk associated with property damage due to water leakage or flooding:
DO NOT install systems in areas where ambient temperatures may go above 100°F
(38°C) or drop below 33°F (0.6°C).
DO NOT install on hot water supply lines. The maximum operating water temperature
of this filter system is 100°F (38°C).
DO NOT install where water hammer conditions may occur. If water hammer conditions
exist, you must install a water hammer arrester.
WARNING!
To reduce the risk associated with choking:
DO NOT allow children under 3 years of age to have access to small parts during the
installation of the water filter.
!
WARNING!
Electric Shock Hazard
Read and follow the safety and warnings outlined in this installation
guide before operating this appliance.
Failure to do so can result in death, electric shock, fire or injury
topersons.
!
WARNING!
Cut Hazard
Take care—panel edges are sharp. Failure to use caution could result
ininjury or cuts.
!
WARNING!
This appliance is top-heavy and must be secured to prevent the
possibility of tippingforward.
To ensure that the appliance is stable under all loading conditions,
theanti-tip bracket and fittings supplied must be installed according
tothe following installation instructions by a professional installer.
Loading ...
Loading ...
Loading ...