Loading ...
Loading ...
Loading ...
Section 2 - OPERATING INSTRUCTIONS
2.4 HANDLE HEIGHT ADJUSTMENT
The height of the mower handle can be adjusted
as follows:
1. Loosen the nuts on each lower handle as
shown in Figure 2.7.
HIGHER
LOWER
HANDLE
2. Set all wheels at the same cutting height. The
highest cutting position is Notch 6. The lowest
cutting position is Notch 1. See Figure 2.9.
LATC H L....J
POSITION
LOWER
LOWER
NUTS ON EACH
LOWER HANDLE
/
/./
FIGURE 2.7
IMPORTANT! Some models are equipped with braces
that attach to the lower handle brackets and must be
loosened before handle height can be adjusted.
2. Move upper mower handle up or down until the
desired position is achieved.
3. Tighten the lower nuts on each lower handle to
maintain desired position.
I_ . WARNING AI
ei°_n_!i°_ bn1°rm°awdjrusbli_decbtYtirglehsiiggtth: I
2.5 CUTTING HEIGHT ADJUSTMENT
1. Pull the height adjusting latch outward and
move to desired cutting height. See Figure 2.8.
D OWEST CUTTING
HEIGHT
/
/
CUTTING
HEIGHT
FIGURE 2.8
CUTTING HEIGHT SETTINGS
FIGURE 2.9
Loading ...
Loading ...
Loading ...