Loading ...
Loading ...
Loading ...
5INSTALLING YOUR APPLIANCE
WARNING
WARNING
To avoid any potential hazard, you must follow our
instructions when you install your appliance. Failure
to install the appliance correctly could invalidate any
warranty or liability claims and lead to prosecution.
• This appliance must be installed by an authorised
person according to all codes and regulations as
stated in the local municipal building code and other
relevant statutory regulations.
• Wiring connections must be in accordance with AS/
NZS 3000 Wiring Rules and any particular conditions
of the local authority.
• Refer to data plate for rating information. The data
plate is positioned behind the bottom of the oven
door.
• Disconnection in the fixed wiring must occur in
accordance with the AS/NZS 3000 wiring rules.
• Wiring should be protected against mechanical
failure. Refer to AS/NZS 3000
• A means of disconnection with a contact separation
of at least 3mm must be supplied in the fixed wiring.
• This range must be connected with cable of 75°C
rating minimum.
• This product has passed the insulation resistance test
after manufacture. If the resistance reading is low at
installation, it is probably caused by moisture from
the atmosphere being absorbed by the elements
after the range has been produced. (Pass at 0.01MΩ
as per AS/NZS 3000 Wiring Rules).
• This appliance must be fixed in position or must be
connected to the supply by a supply cord fitted with
a male connector
WARNING
WARNING
This appliance must be properly earthed.
• Do not lift the appliance by the door handle.
• Prepare the cupboard opening to match your
appliance measurements. (See diagrams)
• Slide appliance into the cupboard, ensuring that the
supply cable (where fitted) does not kink.
• To prevent tipping, use the screws supplied to secure
your oven into the cupboard.
• For appliances fitted with a flexible supply cord, if
the cord is damaged, it must be replaced by the
manufactorer or its service agent or similarly qualified
person in order to avoid a hazard. The plug must be
accessible after installation.
• Where the appliance is built into a cabinet, the
cabinet material must be capable of withstanding
70°C. Installation into low temperature tolerant
cabinetry (e.g. vinyl coated) may result in
deterioration of the low temperature coating by
discolouring or bubbling.
• If the appliance is installed adjacent to vinyl-wrapped
surfaces, use an installation kit available from the
vinyl-wrap supplier.
• Electrolux Home Products cannot accept
responsibility for damage caused by installation into
low temperature tolerant cabinets.
• After installation, test and ensure that the appliance
operates correctly before handing it over to the
customer. It is recommended that this product is not
installed in an unvented living space, particularly if
that space incorporates sleeping quarters.
• If a powerpoint is fitted it must be accessible with the
appliance installed, as the plug must be accessible
after installation.
• This appliance must be mounted on a flat surface for
the full width and depth of the product.
• To avoid overheating, the appliance must not
be installed in a recess or cupboard behind a
decorative door.
INSTALLING YOUR APPLIANCE
MODEL
PRODUCT DIMENSIONS
(H X W X D) MM
MINIMUM FUSE
RATING
MAXIMUM
POWER RATING
MAXIMUM
CURRENT RATING
WIRE SECTION
(MM²)
WVE613 597 x 596 x 569 16A 2.3kW 9.6A 2.5
WVE615 597 x 596 x 569 16A 3.1kW 12.9A 2.5
Note: Electrical connection is 230-240 volts AC 50Hz. Wiring minimum temperature rating 75°C.
Loading ...
Loading ...
Loading ...