Loading ...
Loading ...
Loading ...
- 6 -
06/2021
Copyright © 2021, Fast ČR, a.s.
EN
Stick blender
User'smanual
■ Prior to using this appliance, please read the user’smanual thoroughly, even in cases, when one has already familiarised themselves with previous
use of similar types of appliances. Only use the appliance in the manner described in this user’smanual. Keep this user’smanual in asafe place
where it can be easily retrieved for future use. In the event that you hand this appliance over to somebody else, make sure to also include this
user’smanual.
■ Carefully unpack the appliance and take care not to throw away any part of the packaging before you find all its parts. We recommend saving the
original cardboard box, packaging material, purchase receipt and responsibility statement of the vendor or warranty card for at least the duration
of the legal liability for unsatisfactory performance or quality. In the event of transportation, we recommend that you pack the appliance in the
original box from the manufacturer.
DESCRIPTION OF THE APPLIANCE AND ITS ACCESSORIES
A1 Normal speed switch
A2 High speed switch (turbo)
A3 Motor unit
A4 Removable blender stick attachment
A5 Blade assembly
A6 Beaker, volume 700 ml
A7 Anti-slip base pad / lid
A8 Whisk attachment with gear system
A9 Whisk
A10 Chopper bowl lid with gear system
A11 Chopper with blade assembly
A12 Protective cover
A13 Chopper bowl, volume 500 ml
A14 Shaft
A15 Anti-slip base pad
B1 Help arrow
B2 “Unlocked” symbol
B3 “Locked” symbol
C1 Locking tabs
PURPOSE OF USE
STICK BLENDER ATTACHMENT
■ It is suitable for blending soft ingredients and liquids. It is used namely for preparing baby food, various types of milkshakes, sauces, spreads, etc.
WHISK
■ The whisk is suitable for preparing light batters or for whipping cream, egg whites, dessert creams, liquid sponge cake doughs, mayonnaise, etc.
Do not use it to whip thick doughs.
CHOPPER
■ It is suitable for chopping tougher foods such as meat, semi-hard or hard cheese, fruit and vegetables in their raw state, nuts, herbs, etc. Thanks to
its special tabs, it is also suitable for chopping harder foods such as ice cubes, coffee beans, nutmeg, cocoa beans.
BEFORE FIRST USE
■ Thoroughly wash all removable accessories that are intended to come into contact with food using warm water and aneutral kitchen detergent.
Then rinse them with clean water and allow them to dry naturally or wipe them thoroughly dry using afine wiping cloth.
■ Clean parts A8 and A10, which are equipped with agear system, only using adampened cloth. Take care that water does not enter into these parts.
Attention:
When cleaning blade assemblies A5 and A11, be very careful not to injure yourself on their sharp edges.
■ When cleaning the stick blender attachment A4, do not submerge the top end that connects to the motor unit A3.
ATTACHING AND REMOVING BLENDING AND WHIPPING ATTACHMENTS
Attention:
Before attaching or removing attachments A4 or A8, make sure that the motor unit A3 is turned off and disconnected from the
power socket and that the rotating parts have come to acomplete stop. The parts of the attachments that are connected to the
motor unit, must be thoroughly dry.
■ Depending on the activity, select attachment A4 or A8. Slide the selected attachment on to the motor unit A3 from underneath so that the arrow
B1 on the rear side of the motor unit points at the unlocked padlock symbol B2 on the attachment.
■ Turn the motor unit so that the arrow moves to the locked padlock symbol B3. The connection of both parts is accompanied by aclick.
■ To release the attachment from the motor unit, firmly grasp both parts and turn the motor unit so that the arrow points at the open padlock symbol.
Pull both parts away from each other.
Loading ...
Loading ...
Loading ...