Loading ...
Loading ...
Loading ...
7
Installation
English
Step 1 - Mounting the Wall
Plate on Wall
Warning: Do not drill into mortar joints.
Besure to drill holes centered within studs or
bricks.
A. Mounting on solid concrete or
concrete block wall
1. Choose a proper height for your TV. Level
the wall plate paper template on wall and
paste it in place for your safe drilling.
Note: This is the drilling template to be pasted
on wall for drilling holes easily and safely.
Drill here
(16" apart)
Drill here
(16" apart)
Drill here
(16" apart)
Drill here
(16" apart)
16 in. (406.4 mm) apart
Drill here for solid concrete or concrete block wall only Drill here for solid concrete or concrete block wall only
Paper Template
2. Using a 3/8" (10 mm) drill bit , drill 6 pilot
holes into solid concrete.
Note: Pilot holes must be drilled to a
depth of 3" (75 mm).
Note: This is the drilling template to be pasted
on wall for drilling holes easily and safely.
Drill here
(16" apart)
Drill here
(16" apart)
Drill here
(16" apart)
Drill here
(16" apart)
16 in. (406.4 mm) apart
Drill here for solid concrete or concrete block wall only Drill here for solid concrete or concrete block wall only
3. Remove the wall plate paper template
from wall and insert 6 concrete anchors
(C) into the holes. You can use a hammer
to lightly tap the anchors into place if
necessary.
Caution: Ensure that the anchor is flush
with the concrete surface.
4. Install the wall plate on wall using 6lag
bolts (A) and washers (B).Tighten the lag
bolts securely so that wall plate is firmly
attached to wall.
Warning: Do not over tighten. Over
tightening can damage the lag bolts,
greatly reducing their holding power.
Loading ...
Loading ...
Loading ...