Loading ...
Loading ...
No.3 Setting time, Press “TIME” key, then, press the UP arrow key or down arrow key, set the
right time. ( For T-shirt: 15~20 sec.)
No. 4 Flatly place the cloth on the lower printing plate, then cover the printing paper (please
note the working surface of the paper), push the handle down to specified point. Please
note that the force should not more than 25 Kg at this time, or otherwise, the handle
will be transformed.
a. Sublimation Heat Transfer: Temperature 170~190
℃
, Time: 15~20sec.
b. Film heat transfer: Temperature 110-150
℃
, Time: 8~15 sec.
c. Foam Heat Transfer: Temperature 120-160
℃
, Time: 8~15 sec.
d. Hot-fix rhinestone: Temperature 160-180
℃
, Time: 10~15 sec.
How to print a T shirt?
A. Take a digital photo Print it out on sublimation paper with sublimation ink in your printer (mirror image
printing). Cut the picture size to be large as you want, then put it on your tee shirt and fix by adhesive tape.
B. Put a T-shirt in the machine. (put the printed sublimation paper on the t-shirt properly.)
1. Get ready on the power, press the power button , the indicator is lighted!
2. Adjust the temperature ( 170° C~ 180° C) and time ( about 15~20 seconds) . When the
temperature reaches the right degree, the top temperature indicator will be extinct.
3. Put the heating flat down ( please note the right surface of the paper) . Please note that the
pressure should be no too much, or too little!
4. When the temperature gets to the set time, the buzzer rings ( please turn off the button and
raise.
Your customized T shirt is done! Very Simple : )
THE QUESTION PROMPT FOR THE FAILURE PRINTING
A. the color is lighter: the temperature is too low, or the pressure is not even, or the time is too short.
B. The design is indistinct: the time is too long and lead to ink diffusing.
C. The design has no luster: the pressure is too high or temperature too high.
D. Part of design is indistinct: heat printing zone or the heating is not even.
E. Scar on design: heat printing time is too long.
F. Dept of color is not the same: pressure not even or the coating is not even.
G. Paper stick to the object: the temperature is too high, or the coating of the object is not good.
Print your own customized product you need:
1. One Ink jet printer/ six colors printer (For example: Epson R-230 / R270 / R290 / T50/L805)
2. One CISS (Continuous ink supply system)
Different models of Ink jet Printer will need different CISS.
3. Sublimation ink;
4. High-temperature resistant tape;
5. Sublimation paper; or Heat transfer fabric paper