Loading ...
Loading ...
Loading ...
About the controls with temperature settings.
EnerggSover Door Alarm
(Models with controls inside the refrigerator)
Hold for 3 Seconds
to _ctlvate LOCE
!_ ENERGYSAVERON
FREEZERJI REFRIGERATOR
°__EL_JL_2LE
4
(Models with controls on the door)
NOTE: The refrigerator is shipped with protective film covering the temperature controls.
If this film was not removed during installation, remove it now.
The temperature controls are preset in the factory at 37°F for the refrigerator
compartment and O°F for the freezer compartment. Allow 24 hours for the temperature
to stabilize to the preset recommended settings.
The temperature controls can display both the SET temperature as well as the actual
temperature in the refrigerator and freezer. The actual temperature may vary slightly
from the SET temperature based on usage and operating environment.
Setting either or both controls to OFF stops cooling in both the freezer and refrigerator
compartments, but does not shut off electrical power to the refrigerator.
Changing the Temperature
For Controls-on-the-Door Models:
Models with External Dispensers:
To change the Refrigerator temperature:
Access By: Home > Refrigerator
Activate By: Usingthe arrows to select the desired
temperature. Youmust press ENTERto set the new
temperature.
To change the Freezer temperature:
Access By: Home > Freezer
Activate By: Usingthe arrows to select the desired
temperature. Youmust press ENTERto set the new
temperature.
Once the desired temperature has been set,the dispbg will
return to the HOMEscreenand show the set temperatures
underneath the actual temperature display for several
seconds. Severaladjustments may be required. Each time
you adjust the controls, allow 24 hours for the refrigerator
to reach the temperature you have set.
For Controls Inside the Refrigerator:
Opening the door dispbgs the actual temperature. To
change the temperature, presseither the WARMERor
COLDERtouch pods until the desiredtemperature is
displayed.
Oncethedesiredtemperaturehasbeenset,the
temperaturedisplaywill returnto the actual refrigerator
andfreezertemperaturesafter 5 seconds.Several
adjustmentsmayberequired.
Eachtime you adjustcontrols,allow24hoursfor the
refrigeratorto reachthe temperatureyou haveset.
Toturn the cooling systemoff,top the WARMERpodfor
eitherthe refrigeratororthefreezeruntilthedisplayshows
OFF.Toturn the unit backon, pressthe COLDERpodfor
eitherthe refrigeratororfreezer.Thenpressthe COLDER
podagainand it willgo to the presetpointsof O°Ffor the
freezerand37°Ffor the refrigerator.Settingeitheror both
controlsto OFFstopscoolinginboththe freezerand
refrigeratorcompartments,but doesnot shutoffelectrical
powerto the refrigeratoE
Modelswith ExternalDispensers:
AccessBy: Home>Options> InformationandSettings>
CoolingSgstemOff
Toturn the coolingsystembackon, pressthe touchscreen
andpressthe ONbutton.
ActivateBy: PressingENTER.
Loading ...
Loading ...
Loading ...