Loading ...
EN
Pg 2 of 3
L75MS QSG | Part No: 950-0594-001 | Rev 1.0
© 2021 HARMAN International Industries, Incorporated. All rights reserved.
4. Pair the Remote
-
1 2
Press & Hold >2 sec
Press & Hold >3 sec
5. Connect to a Network
For a Wired Connection
Connect the Ethernet port on the rear to the port on a wireless router using a CAT-5e or higher cable.
For a Wi-Fi Direct Connection
1. On your mobile device, download and open the Google Home App.
2. Follow Google Home instructions to add devices.
3. Follow the prompts for adding devices. Note: We recommend giving the
speaker a common name so that it can be easily found for
streaming later.
NOTE: If a name other than L75ms is selected during this step, write it down as it will be what is used to connect to the unit when
streaming or using Bluetooth.
'ŽŽŐůĞ,ŽŵĞ
Turning Off Network
Network functionality can be turned Off should it be required. The same buttons are used to turn the network On and Off.
Note: When network is Off the following conditions exist.
• Speaker cannot be used for Network streaming when in or out of standby
• Speaker can be used for Bluetooth streaming when out of standby
• Button on top panel must be pressed to wake the unit from standby
Allow <1min to allow unit to wake up from standby before using the remote or connecting via Bluetooth.
Apple Airplay
To listen to audio via AirPlay on the speaker, ensure your Apple device is connected to the same network as the Receiver and simply
select the Speaker as the AirPlay audio playback device.
Note: The speaker will appear as L75MS within the AirPlay speaker menu.
6. Connect a Source via Bluetooth
Select the Bluetooth Source
Select L75ms in your devices Bluetooth menu
Press & Hold >3 sec
2 31
Press Simultaneously
+
Press Simultaneously
Loading ...
Loading ...
Loading ...