Loading ...
Loading ...
Loading ...
White Balance Auto Bracketing
White balance bracketing enables you to capture three images at once with different color
tones.
Setting the white balance bracketing amount
B/A bias ±3 levels
In step 2 for White Balance Correction, when you turn the < > dial, the “■” mark on
the screen will change to “■ ■ ■” (3 points).
Turning the dial clockwise sets the B/A bracketing, and turning it counterclockwise sets
the M/G bracketing.
On the right of the screen, [Bracket] indicates the bracketing direction and correction
amount.
Pressing the < > button will cancel all the [WB Shift/Bkt.] settings.
Press < > to exit the setting.
Caution
During white balance bracketing, the maximum burst for continuous shooting will
be lower.
Since three images are recorded for one shot, it takes longer to record the image to
the card.
Note
The images will be bracketed in the following sequence: 1. Standard white balance,
2. Blue (B) bias, and 3. Amber (A) bias, or 1. Standard white balance, 2. Magenta
(M) bias, and 3. Green (G) bias.
You can also set white balance correction and AEB together with white balance
bracketing. If you set AEB in combination with white balance bracketing, a total of
nine images will be recorded for a single shot.
The white balance icon blinks when WB bracketing is set. (If the icon is not shown,
press the < > button repeatedly to switch the display.)
Bracket stands for bracketing.
231
Loading ...
Loading ...
Loading ...