Loading ...
Loading ...
Loading ...
6
POWERING THE PMA-2B
Installing a Battery
1. Press the battery compartment release, and open the battery compartment door.
2. Press the battery connector onto the terminals of a 9-volt battery, and place the battery into the battery
compartment.
3. Close the battery door until it clicks shut.
4. Press the on/off button to turn on the PMA-2B. The Green LED indicator will illuminate to indicate sufficient
battery power.
Battery Status LEDs
When a new battery is installed, the green LED will glow, indicating that the battery is at full power. As the battery
life decreases, both the green and red LEDs will glow. When only the red LED glows, the battery is low and needs to
be replaced.
Tip: Install a fresh battery before a lengthy session or show.
Plug-In Power
The PMA-2B can be powered from an outlet by connecting the PS-9V AC adapter (available separately).
Loading ...
Loading ...
Loading ...