Loading ...
Soak
Thiscyclefeaturesagitationfollowedbyunlimitedsoaktimeto
helpremovestainsthatneedpretreatment.Aftersoaking,you
havetwooptions.Tousethesamewaterinawashcycle,
advancetheTimerknobtoawashcycle.Toremovethesoak
water,resetthewashertoaSpinsetting.IftheSoakwaterwas
drained,addadditionaldetergentandstartanewwashcycle.
NOTE:Usetheamountofdetergentorpresoakadditive
recommendedbythedetergentmanufacturer.
Prewash
This cycle helps to remove heavy soils that need pretreatment.
This cycle should be followed by a wash cycle. Add additional
detergent to the wash cycle. The Prewash cycle does not include
a rinse.
Extra Rinse
A second rinse can be used to aid in the removal of detergent or
bleach residue from garments. The rinse may be automatically
added to the wash cycle by setting the Options Control to Extra
Rinse before you start the washer. You won't have to come back
later to select a second rinse.
Quick Wash
This cycle can be used for lightly soiled loads that are needed
quickly. The agitation and spin speeds will vary based on the
Fabric Select setting that has been chosen.
On some models, the timed bleach dispenser automatically
dispenses liquid chlorine bleach to the wash load a few minutes
after agitation begins in order to give the detergent time to achieve
the best soil and stain removal.
NOTE: On all models, do not use bleach dispenser to add
powdered chlorine or color-safe bleach to your wash load. The
dispenser is for liquid chlorine bleach only. Color safe or
powdered bleach should be added with your detergent.
Adjust water level to load size. Clothes should move freely. To
change to a higher water level after agitation starts, you may turn
knob to desired setting.
On models with a variable Load Size or Water Level control, you
should turn the knob to RESET, then to desired setting.
You should select a wash temperature based on the type of fabric
and soils being washed. For best results, use the warmest wash
water safe for the fabric. Follow garment label instructions.
The Automatic Temperature Control (ATC)(on some models),
electronically senses and maintains a uniform water temperature
by regulating incoming hot and cold water.
• Even in Cool wash, some warm water is let into the washer to
maintain a minimum temperature of approximately 70°F (21°C).
Care Control Temps
Care Control Temps (on some models), uses ATC to electronically
sense and maintain a uniform water temperature by regulating
incoming hot and cold water. To provide better fabric care, Care
Control Temps uses higher wash temperatures for the more
aggressive, heavy-duty cycles and slightly lower temperatures on
cycles for delicate and hand wash items.
NOTE: Make sure that both hot and cold water faucets are turned
on or the Care Control Temps feature will not work properly.
You may turn the Extra Rinse Control knob to ON to get a second
rinse at the end of any of your regular cycles.
On models without an Extra Rinse Control knob you may choose
a second rinse by pushing the cycle control knob in and rotating it
to any of the "Rinse" settings.
The end of cycle signal is helpful when you are washing items that
should be removed from the washer as soon as the cycle ends.
Using the Extra Rinse Control and Cycle Signal Control
• Set the selector to OFF if you do not desire an Extra Rinse or
an end of cycle signal.
• Set the selector to EXTRA RINSE for an Extra Rinse only.
• Set the selector to CYCLE SIGNAL for an end of cycle signal
only.
• Set the selector to CYCLE SIGNAL & EXTRA RINSE for an
Extra Rinse and an end of cycle signal.
Loading ...
Loading ...
Loading ...