Loading ...
Loading ...
Loading ...
Level
• Use this button to set dry level
• First, select sensor dry cycle.
• Select dry level to adjust how
much you want to dry the
load. As the cycle runs, the
control senses the dryness of
the load and adjusts the time
automatically based on the
selected dryness level.
DRYLEVELselections can only be made while
using Sensor Dry Cycles. Selecting
MOREDry or LESSDry automatically adjusts the
needed time which is already sensed.
Control
Use Time Control Option to
select temperatures for the
Manual Cycles. Press TEMP.
CONTROL until the desired
temperature setting glows.
Temperature modifiers cannot
be used with the Sensor Dry
Cycles.
Foam rubber-pillows, 20,30
padded bras, stuffed toys
Plastic-Shower curtains,
20_30
tableclothes
Rubber-backed rags 40 ' 50
Olefin, polypropylene, 10 : 20
shear nylon
24
Time Dry
Use Time Dry Option to change
Drying Time on your own.
You can select the desired operation
time manually by pressing Time Dry
button which ranges from 20 to 60
minutes.
Manual Dry Templ Default Time*
Cycles Load Type (Minutes)
SPEED DRY
SMALL LOADS High
25
FRESHEN UP Medium 20
Remove Wrinkles High
AIR DRY Air Dry 30
The BEEPER controls the
volume of the beep that is made
when you press any of the
buttons on the control panel and
the termination of any cycle is
indicated.
Press BEEPER to adjust the
sound level or turn off the signal.
CUSTOMPROGRAM
Custom Programming Set up your
favorite combination
of settings and save them here for one-
touch recall.
1. Select a cycle
2. Change DRY LEVEL and TEMP. CONTROL.
3. Select OPTIONS you want.
4. Press and hold the CUSTOM PROGRAM.
To recall your stored CUSTOM PROGRAM
Press CUSTOM PROGRAM button, then press
START/PAUSE.
Loading ...
Loading ...
Loading ...