GE - General Electric PDCF1NBWABB GE bottom-mount refrigerator

User Manual - Page 4

For PDCF1NBWABB.

PDF File Manual, 140 pages, Download pdf file

Loading ...
Loading ...
Loading ...
Aboutthe controlswith temperaturesettings.
(onsomemodels)
TEMPERATURE SET
[]
[] []
HOM 3 seconds to reset Ho_d 3 seconds
(onsomemodels)
NOTE: Therefrigeratoris shipped with protective film coveringthe temperaturecontrols.
If this film was not removedduringinstallation, removeit now
The temperature controls are preset in the factory at 37°F for the refrigerator compartment
and O°F for the freezer compartment. Allow 24 hours for the temperature to stabilize to the
preset recommended settings.
The temperature controls can display both the SET temperature as well as the actual
temperature in the refrigerator and freezer. The actual temperature may vary slightly from
the SET temperature based on usage and operating environment.
Setting either or both controls to OFFstops cooling in both the freezer and refrigerator
compartments, but does not shut off electrical power to the refrigerator.
4
Changing the Temperature
For Controls-on-the-DoorModels:
To change the temperature, press and release the
WARMER or COLDER pad. The ACTUAL TEMPlight
will come on and the display will show the actual
temperatm'e. To change the temperatm'e, tap
either the WARMER or COLDER pad tmtil the
desired temperature is displayed.
For ControlsInside the Refrigerator:
Opening the door displa):s the actual temperatm'e.
To change the temperatm'e, press either the
WARMER or COLDER touch pads tmtil the
desired temperature is displayed.
Once the desired temperature has been set,
the temperatm'e display will retm'n to the actual
reflJgerator and freezer temperatures atter B
seconds. Several ac!jusunents inav be required.
Each dine )ou a(!iust controls, allow 24 horns tot the
refrigerator to reach the temperatm'e you haxe set.
To turn the cooling system off, trip the WARMER pad
for either the refl_igerator or the fl'eezer tmtil the
display shows OFF.Toturn the unitback on, press the
COLDER pad fl)r either the refl_igerator or fl'eeze_;
Then press the COLDER pad again and it will go to
the preset points of O°Ffi)r the fl'eezer and 37°Ffi)r
the refiigerato_: Setting either or both controls
to OFFstops cooling in both the fl'eezer and
refi_igerator compartments, but does not shut
off electrical power to the refi_igeratm:
Loading ...
Loading ...
Loading ...