Craftsman 358795510 gas line trimmer

User Manual - Page 8

For 358795510.

PDF File Manual, 13 pages, Download pdf file

Loading ...
Loading ...
Loading ...
For trimming or scalping, use less
than full throttle to increase line life
and decrease head wear, especially:
During light duty cutting.
Near objects around which the line
can wrap such as small posts,
trees or fence wire.
For mowing or sweeping, use full
throttle for a good clean job.
TRIMMING - Hold the bottom of the
trimmer head about 3 in. (8 cm) above
the ground and at an angle. Allow only
the tip of the line to make contact. Do
not force trimmer line into work area.
Trimming . _..
3 in. (8cm) 4 "_&_\
Above Ground _ "- _.
SCALPING - The scalping technique
removes unwanted vegetation down
to the ground. Hold the bottom of the
trimmer head about 3 in. (8 cm) above
the ground and at an angle. Allow the
tip of the line to strike the ground
around trees, posts, monuments, etc.
This technique increases line wear.
Scalping ......
MOWING - Your trimmer is ideal for
mowing in places conventional lawn
mowers cannot reach. In the mowing
position, keep the line parallel to the
ground. Avoid pressing the head into
the ground as this can scalp the
ground and damage the tool.
Mowing I!
.
SWEEPING - The fanning action of
the rotating line can be used for a
quick and easy clean up. Keep the
line parallel to and above the surfaces
being swept and move the tool from
side to side.
Sweeping k_,_ L___._- "'t ....
MAINTENANCE SCHEDULE
WARNING: Disconnect the spark plug before performing maintenance
except for carburetor adjustments.
CARE & MAINTENANCE TASK
Check for loose fasteners and parts
Check for damaged or wom parts
Inspect and clean unit and labels
Clean air filter
inspect muffler and spark arresting screen
Replace spark plug
WHEN TO PERFORM
Before each use
Before each use
After each use
Every 5 hours of operation
Every 50 hours of operation
Yeady
GENERAL RECOMMENDATIONS
The warranty on this unit does not
cover items that have been subjected
to operator abuse or negligence. To
receive full value from the warranty,
the operator must maintain unit as
instructed in this manual. Various ad-
justments will need to be made peri-
odically to propedy maintain your unit.
CHECKFORLOOSE
FASTENERS AND PARTS
: Spark Plug Boot
Air Filter
Housing Screws
Assist Handle Screw
Debris Shield
8
Loading ...
Loading ...
Loading ...