Loading ...
Loading ...
Loading ...
My accessories are not receiving power
• Verify the Garmin PowerSwitch device is receiving power from the vehicle battery.
• Verify that your vehicle's battery is supplying at least 12 V of power.
The Garmin PowerSwitch device turns off all outputs automatically to preserve your vehicle's battery if it is
receiving less than 11 V of power. Outputs turn back on when the device detects more than 12 V of power.
• Verify that all electrical connections are secure and will not come loose while operating the vehicle.
• Verify that each connected accessory draws less than 30 A.
If an accessory draws more than 30 A, the device turns off that output automatically.
• Verify that the total system load is less than 100 A.
If the device detects a system load of more than 100 A, it turns off all outputs automatically.
• Inspect all electrical connections for an electrical short circuit.
Wireless Cameras
Your device can display the video feed from one or more connected wireless cameras (sold separately).
Pairing a BC
™
50 Backup Camera with a Garmin Navigation Device
Before you can connect to a camera you must enable the Wi‑Fi setting on your Garmin navigation device.
The BC 50 wireless backup camera is compatible with some Garmin navigation devices with Android. Go to
garmin.com/bc50 for more information about device compatibility.
You can pair up to four BC 50 wireless backup cameras with your compatible Garmin navigation device.
1 Update your navigation device to the latest software.
Your device may not support the BC 50 camera without the latest software. For more information about
updating the software, see the owner's manual for your navigation device.
2 Turn on the Garmin navigation device, and bring it within 3 m (10 ft.) of the camera.
3 Place the vehicle in reverse to power the camera.
4 Select > Tools > Cameras > > BC50.
5 Select your BC 50 camera from the list of available cameras.
6 Position the guidance lines using the on-screen arrows.
If the camera or vehicle is not ideally positioned to complete the guidance line alignment, you can complete
the alignment later.
7 Select Save.
After you complete the pairing process with a camera for the first time, the camera and navigation device
connect automatically when they are turned on and within range.
Appendix 75
Loading ...
Loading ...
Loading ...