INSTALL EASY CONNECT MOUNTING BRACKET:
Electrical
Box
QUESTIONS OR CONCERNS CONTACT CANARM AT:
1-800-265-1833 (English) • 1-800-567-2513 (French)
Monday through Friday 8:00 AM to 5:00 PM E.S.T.
SAFETY PRECAUTIONS:
1. TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF
LIGHT FIXTURE.
2. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE
INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND
OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
L
I
G
H
T
I
N
G
&
F
A
N
S
E
C
L
A
I
R
A
G
E
S
&
V
E
N
T
I
L
A
T
E
U
R
S
Black
(Live)
White
(Neutral)
Green
(Ground)
Attach easy connect
mounting bracket
to electrical box with
electrical box screws
(not included).
STEP 1
Connect (push) electrical wires from fixture into correct inserts.
Black (live), White (neutral), Green (ground)
EASY CONNECT®
INSTALLATION INSTRUCTIONS
L
N
Light
Fixture
STEP 3
CONNECT LIGHT FIXTURE
!
“INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS”
“READ ALL INSTRUCTIONS”
“IMPORTANT SAFETY
INSTRUCTIONS”
“SAVE THESE INSTRUCTIONS”
EW-2
12/12
STEP 4
Tuck electrical wires into outlet box and position fixture over studs or nipple on mounting bracket assembly.
Secure fixture in place with star washer(s) and cap nut(s).
Note: If required, assemble body and spread the arms of the fixture out evenly.
Star
Washer
Stud
Or
Nipple
Cap
Nut
Fixture
STYLE#1
STYLE#2
Glass
Spinner
Nut
Optional
Fixture
Socket
STYLE#1 - Remove spinner nut from
socket. Position glass on the fixture
and secure with spinner nut. Install
proper bulb type and wattage.
Note:
Glass may face up or down.
STEP 5 - Optional for some models (
Note: Refer to the style of assembly that matches the style of your fixture.)
Imported By: CANARM LTD., 2157 Parkedale Ave., Brockville, Ontario, K6V 5V6, Tel: (613) 342-5424, Fax: (800) 263-4598
Electrical
Box Screws
Cover
Back
(not included)
Wood Screw
Additional support may be required
for fixtures longer than 20”
. Position
the fixture and add wood screws
(one on each side) for the wooden
studs or plastic wall anchor and wood
screws for dry wall.
STYLE#2 - Install proper bulb type
and wattage. Install the glass to the
fixture by tightening the 2 thumb
screws.
L
N
L
N
Connect (push) electrical
wires from electric box
(house wiring) into correct
inserts. Black (Live),
White (Neutral),
Green (Ground)
For multiple black (live) &
white (neutral) wires joined
in the electrical box
(house wiring), attach a single
“black” and “white” Jumper Wire
before connecting. Strip 7mm
from a 6” Jumper Wires (AWG 12-24)
supplied. Then connect (push) wires
into correct inserts.
STEP 2 - Option 1
Jumper Wire
Jumper
Wire
Option 2 - MULTIPLE ELECTRICAL BOX WIRES
CONNECT HOUSE WIRES
(L)
Black
(Live)
(L)
Black
(Live)
(L)
Black (Live)
(N)
White
(Neutral)
(N)
White
(Neutral)
(N)
White
(Neutral)
Green
(Ground)
Green
(Ground)
Green
(Ground)
NOTE: Product May Not Look Exactly As Shown In Figures.
