Loading ...
Loading ...
Loading ...
15
ECO OPTION
Water Return
(Model: SWT754)
Pressing the “Eco Option” button allows you to change the Eco options.
to return water to the washing machine from the laundry trough.
Before you save water, make sure that the laundry trough has enough capacity or an overflow drain
is fitted to avoid flooding onto the floor. The recommended size for the laundry trough is 104 litres.
At the start of the WATER RETURN cycle the pump and hose are primed by letting some water from the
tap into the washing machine and then pumping it out into the trough.
This is a normal process, DO NOT turn the washing machine OFF during this process.
Refer also to the Installation Instructions supplied with your washing machine for more information.
It will tell you how to position the drain hose and suds return hose for efficient working of the water
saving options.
NOTE: You cannot select Wash Water save and Rinse Water save together,
only one or the other.
You can save energy, water and detergent by reusing the sudsy wash water. Or you can save just water using
rinse save.
When a WATER SAVE option and ECO RINSE are used together, you have the ability to take advantage of the
full water saving options.
Follow the instructions on this page to return saved water to the washing machine and the instructions on page 16
to save water.
At each press of the Eco Option button pad you will get a different combination of water save and rinse options to
choose from.
This model has only two types of rinses which are Eco Rinse and Deep Rinse. This can be
identified by if the Eco Rinse light is on the machine will do the Eco Rinse, if the Eco light is off
the machine will perform a Deep Rinse.
To return water from the laundry trough to the washing machine proceed as follows:
The machine needs small amount of water to prime the pump for water return, therefore the taps must be turned on.
If there isn’t any water entering the tub the machine will show ‘ ’ After 5 minutes.
Make sure that the hot and cold taps are turned on.
Press the ECO OPTION button pad until the WATER RETURN light is ‘ON’.
Press the START/PAUSE button pad to start the Water Return cycle.
The Water Return cycle will stop and the WATER RETURN light will go ‘OFF’ when the
trough is empty, or when the selected WATER LEVEL has been reached in the washbowl.
5.
4.
3.
1.
Make sure there isn’t any clothing in the sink during suds return eg. Socks.2.
The washing machine will then return to the default set WASH program in the PAUSE mode.
The water return process can take up to 10 minutes to complete.
You may then load clothes into the washing machine and press START/PAUSE to commence the wash cycle.
to automatically save your wash water for use in your next wash load.
to automatically save water from the rinse cycle for later use.
Eco rinse is a spray rinse giving you maximum water saving (for more
information, see page 14).
You can select:
Water Return
Water Save
Rinse Save
Eco Rinse
CAUTION:
NOTE:
NOTE:
Loading ...
Loading ...
Loading ...