Loading ...
Accidental short-circuiting can happen when a metallic object
touches the metal strips on the battery. This may damage the
battery or the other object.
Small children
Your device and its accessories are not toys. They may contain small
parts. Keep them out of the reach of small children.
Medical devices
Operation of radio transmitting equipment, including wireless
phones, may interfere with inadequately shielded medical devices'
function. Consult a physician or the medical device's manufacturer to
determine if it is adequately shielded from external radio energy.
Implanted medical devices
To avoid potential interference, manufacturers of implanted medical
devices recommend a minimum separation of 15.3 centimeters (6
inches) between a wireless device and the medical device. Persons
who have such devices should:
Always keep the wireless device more than 15.3 centimeters (6
inches) from the medical device.
Not carry the wireless device in a breast pocket.
Hold the wireless device to the ear opposite the medical device.
Switch the wireless device off if there is any reason to suspect
that interference is taking place.
Follow the manufacturer directions for the implanted medical
device.
If you have any questions about using your wireless device with an
implanted medical device, consult your health care provider.
Hearing
Warning: When you use the headset, your ability to hear outside
sounds may be affected. Do not use the headset where it can
endanger your safety.
Some wireless devices may interfere with some hearing aids.
Nickel
The surface of this device is nickel-free.
Vehicles
Radio signals may affect improperly installed or inadequately
shielded electronic systems in vehicles. For more info, check with the
manufacturer of your vehicle or its equipment.
Only authorized personnel should install the device in a vehicle.
Faulty installation may be dangerous and invalidate your warranty.
Check regularly that all wireless device equipment in your vehicle is
mounted and operating properly. Do not store or carry flammable or
explosive materials in the same compartment as the device, its parts,
or accessories. Do not place your device or accessories in the air bag
deployment area.
Potentially explosive environments
Switch your device off in potentially explosive environments, such as
near gas pumps. Sparks may cause an explosion or fire resulting in
injury or death. Note restrictions in areas with fuel; chemical plants;
or where blasting operations are in progress. Areas with a potentially
explosive environment may not be clearly marked. These usually are
areas where you are advised to switch your engine off, below deck on
boats, chemical transfer or storage facilities, and where the air
contains chemicals or particles. Check with the manufacturers of
vehicles using liquefied petroleum gas (such as propane or butane) if
this device can be safely used in their vicinity.
Certification information (SAR)
This mobile device meets guidelines for exposure to radio waves as
set forth by the Federal Communications Commission (FCC). Refer to
the following.
FCC RF Exposure Information
Your handset is a radio transmitter and receiver. It is designed and
manufactured not to exceed the emission limits for exposure to radio
frequency (RF) energy set by the Federal Communications
Commission of the U.S. Government. The guidelines are based on
standards that were developed by independent scientific
organization through periodic and thorough evaluation of scientific
studies. The standards include a substantial safety margin designed
to assure the safety of all persons, regardless of age and health. The
exposure standard for wireless handsets employs a unit of
measurement known as the Specific Absorption Rate, or SAR. The
SAR limit set by the FCC is 1.6 W/kg. The tests are performed in
positions and locations (e.g. at the ear and worn on the body) as
required by the FCC for each model. The highest SAR value for this
handset model as reported to the FCC when tested for use at the ear
is 1.32 W/kg, and when worn on the body in a holder or carry case, is
1.35 W/kg.
Body-worn Operation; This device was tested for typical body-worn
operations with the handset kept 1.5 cm from the body. To maintain
compliance with FCC RF exposure requirements, use accessories that
maintain a 1.5 cm separation distance between the user's body and
the handset. The use of belt clips, holsters and similar accessories
should not contain metallic components in its assembly. The use of
accessories that do not satisfy these requirements may not comply
with FCC RF exposure requirements, and should be avoided. The FCC
has granted an Equipment Authorization for this handset model with
all reported SAR levels evaluated as in compliance with the FCC RF
emission guidelines. SAR information on this handset model is on file
with the FCC and can be found under the FCC ID Search section of
www.fcc.gov/oet/ea/ after searching on FCC ID 2AJOTTA-1393.
Additional information on Specific Absorption Rates (SAR) can be
found on the FCC website at www.fcc.gov/general/radio-frequency-
safety-0.
To send data or messages, a good connection to the network is
needed. Sending may be delayed until such a connection is available.
Follow the separation distance instructions until the sending is
finished.
During general use, the SAR values are usually well below the values
stated above. This is because, for purposes of system efficiency and
to minimise interference on the network, the operating power of your
mobile is automatically decreased when full power is not needed for
the call. The lower the power output, the lower the SAR value.
Device models may have different versions and more than one value.
Component and design changes may occur over time and some
changes could affect SAR values.
For more info, go to www.sar-tick.com. Note that mobile devices may
be transmitting even if you are not making a voice call.
About Digital Rights Management
When using this device, obey all laws and respect local customs,
privacy and legitimate rights of others, including copyrights.
Copyright protection may prevent you from copying, modifying, or
transferring photos, music, and other content.
Copyrights and other notices
FCC notice:
This device complies with part 15 of the FCC rules and standard(s).
Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause
undesired operation. For more info, go to www.fcc.gov/engineering-
technology/electromagnetic-compatibility-division/radio-
frequency-safety/faq/rf-safety. Any changes or modifications not
expressly approved by HMD Global could void the user’s authority to
operate this equipment. Note: This equipment has been tested and
found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Manufacturer and/or importer in EU: HMD Global Oy, Bertel Jungin
aukio 9, 02600 Espoo, Finland.
HMD Global Privacy Policy, available at http://www.nokia.com/
phones/privacy, applies to your use of the device.
© 2021 HMD Global. HMD Global Oy is the exclusive licensee of the
Nokia brand for phones & tablets. Nokia is a registered trademark of
Nokia Corporation.
This product includes open source software. For applicable copyright
and other notices, permissions, and acknowledgements, select
*#6774# on the home screen.
Manufacturer’s limited warranty
1. General
HMD Global Oy (hereinafter "Manufacturer") provides this
Manufacturer's Limited Warranty ("Warranty") for the genuine Nokia
mobile phone ("Product") which has been released for sale in Latin
America and Caribbean.
Even though one or more countries may be mentioned herein, this
Warranty is valid only in the country where the Product was
purchased through Manufacturer's authorized sales channels,
provided that the Product was intended for sale in that country
("Covered Country").
This Warranty covers and includes any statutory rights under any
mandatory consumer protection laws of the Covered Country
applicable to you, and also grants you specific, and as the case may
be, additional rights, within the limits of what is permissible under
such law. This Warranty does not limit the rights you may have under
applicable consumer protection laws. You may have other rights
based on local laws during or after the Warranty period. These rights
are not excluded by this Warranty.
The Product and its accessories shall be used in accordance with the
instructions provided in the user guides and leaflets that come in the
Product package and are also available at www.nokia.com/mobile-
support.
2. Warranty
The Warranty period starts on the date the Product is sold to an end
user for the first time, as evidenced by the original proof of purchase.
Said first purchaser and anyone who subsequently acquires the
Product during the original Warranty period will be entitled to the
warranty rights.
Manufacturer agrees to cover under warranty defects in materials
and workmanship employed in Product manufacturing ("Defect") for:
(i) Twelve (12) months for the main device; and
(ii) Six (6) months for the battery, charger, headset and any other
accessory included in the sales package of the main device,
unless the law requires that the Manufacturer offers a longer period,
in which case the Warranty period is extended to cover the minimum
period required by the law.
The Warranty period described above includes any mandatory
Warranty term you may have in the Covered Country. As a
consequence, the first month(s) of the Warranty period described
above correspond to the mandatory Warranty term in the Covered
Country and the remaining months until completion of the period
described above correspond to the contractual Warranty term
granted by the Manufacturer.
During the Warranty period, any Defect covered by this Warranty will
be remedied within a reasonable time, free of charge, through the
replacement of the Product or accessory affected by the Defect.
During the Warranty period, in case you suspect that your Product or
any accessory has a Defect, please take it back to the point of sale
where the Product has been purchased. The seller will perform a
preliminary analysis on the Product or accessory and if found to be
defective, the Product or accessory will be replaced. When replacing
your Product, Manufacturer may use new or re-conditioned parts or
Product except where the use of such re-conditioned parts or
Product is barred by local law. In case local law should require the end
user to be informed about the use of re-conditioned parts or
Product, this Warranty document can be considered as the necessary
notice in that regard. In case local law requires consent from the end
user for the use of re-conditioned parts or Product, then such parts
or Product will not be used till such consent has been obtained.
When making a Warranty claim, you must present:
(i) The Product or accessory that has allegedly presented a Defect;
and
(ii) To the extent permitted by applicable laws, this warranty text, duly
stamped by the seller, or the invoice, receipt or other legible and
original proof of purchase, clearly indicating the name and the
address of the seller, the place and date of purchase, the Product
model and the serial number.
This Warranty covers all parts and components of the Product and
includes labor costs. Manufacturer will bear the costs of transporting
the Product within its support network as part of the fulfilment of
Warranty obligations.
To the fullest extent permitted by applicable law:
(i) No replacement will renew or extend the Warranty period unless
such renewal or extension is mandated by local law, in which case the
Warranty period is extended by the minimum time required by law;
(ii) For countries where such renewal or extension is not mandated by
local law, replacement Product or accessories provided under this
Warranty will be covered by this Warranty for the remainder of the
original Warranty period or for ninety (90) days from the date the
replacement Product or accessory is returned to you, whichever is
longer;
(iii) Original Product or accessories not found to be defective will not
be replaced and will be covered by this Warranty for the remainder of
the original Warranty period; and
(iv) The Product or all accessories that have been replaced become
seller's property.
Manufacturer does not warrant that software preinstalled by or on
behalf of Manufacturer in the Product (or subsequent updates and
upgrades) (together "Manufacturer Software") will meet your
requirements, work in combination with any hardware or software
not provided by Manufacturer, be uninterrupted or error free or that
errors are correctable or will be corrected. For Manufacturer
Software related errors, Manufacturer will make available the latest
version of the Manufacturer Software for reinstallation on your
Product or, if that would not be possible, another remedy, which in
Manufacturer's reasonable discretion, satisfactorily addresses the
error. Some Manufacturer Software may be subject to separate
license terms that are available with the Software.
Please always back up all data and content stored on your Product
before taking your Product in for replacement since all data in your
Product will be lost.
Manufacturer and its authorized service providers are not
responsible for the loss the of your data, programs or confidential
information.
3. What this Warranty does not cover
Manufacturer does not provide any Warranty for the following:
(i) errors or damages caused by:
(a) exposure to liquid (unless the Product is declared to be water-
resistant under certain conditions as specified by the Manufacturer),
to extreme electromagnetic field (such as damages caused by
microwave oven), to dampness, to extreme thermal or environmental
conditions or to rapid changes in such conditions, corrosion,
oxidation, spillage of food or liquid, or to influence from chemical
products;
(b) physical damage, cracks, dents or scratches caused by a drop or
by external forces occurring in or on the product including but not
limited to the cover, display, camera lenses, buttons (unless specified
otherwise by the Manufacturer under certain conditions);
(c) using your Product with, or connecting it to, any product,
accessory, software, or service not manufactured or supplied by
Manufacturer;
(d) any products combined with your Product by a third party;
(e) damage or errors caused by hacking, cracking, viruses, or other
malware, or by unauthorized access to services, accounts, computer
systems, or networks;
(f) power outages or surges capable of affecting the normal use of
the Product; or
(g) other acts beyond Manufacturer's reasonable control.
(ii) If your Product's serial number, the mobile accessory date code,
or the IMEI number has been removed, erased, defaced, altered or if
these are illegible in any way;
(iii) Any wear and tear;
(iv) Not using your Product in accordance with the user guide;
(v) If your Product, has been opened, repaired or modified by non-
authorized third parties, or repaired with unauthorized spare parts;
(vi) If you have not installed the latest software updates that are
publicly available for your Product within a reasonable time of their
release; and/or
(vii) This Warranty is not valid outside of the Covered Country and
doesn't cover:
(a) User guides;
(b) Any third party software, settings, content, data, or links installed
or downloaded onto your Product at any time, or Manufacturer and
third-party services or enabling clients even if preinstalled by
Manufacturer (please read the terms and conditions that may
accompany the services as those will define your rights and
obligations);
(c) Reduced charging capacity of the battery resulting from its
natural end of Product life, or pixel defects in your Product's display
that are within the scope of industry standards; and
(d) SIM card and/or any cellular or other networks or system on which
your Product operates.
You won't be able to enforce this Warranty if you refuse to give
possession of the Product to Manufacturer for repair and
investigation.
If this Warranty does not cover your Product or the issue based on
which it requires service, Manufacturer reserves the right to charge
for the repair or replacement of your Product, as well as a handling
fee.
4. Limitation of Manufacturer’s liability
To the extent permitted by applicable law(s), Manufacturer shall not
under any circumstances be liable, either expressly or implicitly, for
any:
(i) Damages or losses of any kind whatsoever resulting from or
relating to loss of, damage to, or corruption of, content or data or the
re-creation or transfer thereof even if such loss, damage, or
corruption was a result of
(a) a Defect in your Product; or
(b) an attempt to repair your Product; and/or
(ii) Loss of profit, productivity, functionality, business, contracts,
revenues or anticipated savings, increased costs or expenses, or for
any indirect, consequential or special loss or damage.
To the extent permitted by applicable law, Manufacturer's liability
shall be limited to the purchase value of your Product.
The limitations in this clause 4 shall not apply in case of
Manufacturer's negligence or intentional misconduct or in case of
death or personal injury resulting from Manufacturer's proven
negligence.
5. Other important notices
For any further information related to your Product and how to
enforce the Warranty, please visit www.nokia.com/mobile-support.
Your Product may contain country-specific elements, including
software. Also, if your Product has been re-exported from its original
destination to another country, your Product may contain country
specific elements that are not considered a Defect under this
Warranty even if those elements or the Product would not be
operational.
6. Additional information
Manufacturer and Warranty provider: HMD Global Oy (address: Bertel
Jungin aukio 9, 02600 Espoo, Finland)
Information to be filled in by the seller if required by local law:
Product model and IMEI:
Seller name and address:
Product acquisition and delivery date(s):
End user name and address:
EN_XX_Vega_QG_DRAFT_02.fm Page 2