Loading ...
Loading ...
Loading ...
6
Thank You for purchasing a Kenmore water heater. Properly
installed and maintained, it should give you years of trouble free
service. It is strongly suggested that this new water heater be
professionally installed, contact the local Sears Service Center or
any Sears store. They will arrange for prompt, quality installation
by Sears authorized contractors.
Abbreviations Found In This Instruction Manual:
UL – Underwriters Laboratories Inc.
NEC – National Electrical Code
ANSI – American National Standards Institute
AHRI - Air Conditioning, Heating and Refrigeration Institute
• Read the General Safety section, page 3 of this manual fi rst
and then the entire manual carefully. If you don’t follow the
safety rules, the water heater will not operate properly. It
could cause DEATH, SERIOUS BODILY INJURY AND/OR
PROPERTY DAMAGE.
This manual contains instructions for the installation,
operation, and maintenance of this electric water heater. It
also contains warnings throughout the manual that you must
read and be aware of. All warnings and all instructions are
essential to the proper operation of the water heater and your
safety. Since we cannot put everything on the fi rst few pages,
READ THIS ENTIRE MANUAL BEFORE ATTEMPTING TO
INSTALL OR OPERATE THE WATER HEATER.
• The product is certifi eld to comply with a maximum weighted
average of 0.25% lead content as required in some areas.
• The installation must conform with the instructions in this
manual; electric company rules; and Local Codes, or in
the absence of Local Codes, with the current edition of the
NEC - National Electrical Code, NFPA 70. This publication
is available from your local government or public library or
electric company or by writing Underwriters Laboratories Inc.,
333 Pfi ngsten Road, Northbrook, IL 60062.
• If after reading this manual you have any questions or do not
understand any portion of the instructions, call Sears Service
Center.
• Carefully plan the place where you are going to put the water
heater. Correct electrical wiring and connections are very
important in preventing death from possible electrical shock
and fi res.
• Keep combustibles such as boxes, magazines, clothes, etc.,
away from water heater area.
Examine the location to ensure the water heater complies with
the Facts to Consider About the Location section.
For California installation, this water heater must be braced,
anchored, or strapped to avoid falling or moving during an
earthquake. See instructions for correct installation procedures.
Instructions may be obtained from California’s Office of
the State Architect, 1102 Q Street, Suite 5100, Sacramento,
CA 95811. Instructions can also be downloaded to your computer
at www.dsa.dgs.ca.gov/Pubs.
Massachusetts Code requires this water heater to be installed
in accordance with Massachusetts 248-CMR 2.00; State
Plumbing Code and 248-CMR 5.00. In the Commonwealth of
Massachusetts, this product must be installed by a licensed
plumber or gasfi tter.
INTRODUCTION
MODEL
NUMBER
NOMINAL
TANK
CAPACITY
IN GALLONS
(LITERS)
DIMENSIONS IN
INCHES (mm)
RECOVERY RATE
GALS. PER HOUR
@90°F RISE
ELEMENT WATTAGE
@ 240 VOLTS
MINIMUM
WIRE SIZE*
(GAUGE)
MAXIMUM
FUSE
OR CIRCUIT
BREAKER
SIZE (AMPS)LOWER UPPERDIA. HEIGHT
153.586320 30 (114) 19.0 (483) 46.75 (1187) 21 4500 4500 10 30
153.586311 28 (106) 22.0 (559) 31.25 (794) 21 4500 4500 10 30
153.586401 40 (151) 18.0 (458) 61.25 (1557) 21 4500 4500 10 30
153.586501 50 (189) 20.5 (521) 60.5 (1537) 21 4500 4500 10 30
153.586511 50 (189) 23.0 (584) 49.0 (1245)
21 4500 4500
10 30
153.586411 40 (151) 20.5 (521) 49.75 (1264)
21 4500 4500
10 30
* Wiring size based on standard 60°C copper wire. If distance from fuse box to water heater is more than 90 feet, refer to your local
electrical code.
PRODUCT SPECIFICATIONS
Printed on 5/3/2019 1:29 PM CT
Loading ...
Loading ...
Loading ...