Loading ...
Loading ...
Loading ...
Operating the tumble dryer
20
f
Time display
After the programme has started, the
programme running time will appear
on the display in hours and minutes.
– When Delay start is being used,
the programme running time will
appear after the Delay start period
has elapsed.
– With most programmes, the run-
ning time displayed may vary or
“jump”. The following factors,
among others, affect the pro-
gramme running time displayed:
the quantity of laundry, the type of
fabric and the residual moisture in
the laundry. The electronic module
adapts to these factors with in-
creasing accuracy.
g
Start/Add laundry sensor control
Touching the Start/Add laun-
drysensor control starts a pro-
gramme. The current programme
can be interrupted to add laundry.
The programme can be started when
the sensor control is flashing on and
off. The sensor control lights up con-
stantly once the programme has
started.
h
Sensor controls
for the Delay start function or the
Time Dry/DryFreshprogramme run-
ning time
After touching the
sensor control, a later
start time for the pro-
gramme (Delay start) can
be selected. Once selec-
ted, lights up brightly.
The or sensor con-
trols are used for select-
ing the duration of the
Delay start period or the
duration of the Warm air/
DryFresh programme.
i
Optical interface
This is used by the Customer Ser-
vice Department as a transmission
point.
j
Programme selector
for selecting programmes and for
switching off the appliance. The
tumble dryer is switched on by se-
lecting a programme and switched
off by turning the programme se-
lector to theposition.
If the tumble dryer is connected to
the WiFi network, you will have ac-
cess to the following alternative op-
tions for selecting programmes.
MobileStart
You can operate your tumble
dryer remotely with the Miele
app.
Wash2Dry
A drying programme tailored to
the laundry is set in conjunc-
tion with the connected wash-
ing machine.
Loading ...
Loading ...
Loading ...