Loading ...
Loading ...
Loading ...
Whenthefreezerisfirststarted,thecompressorwillrunconstantly
untilthefreezeriscooled.Itmaytakeupto6or8hours(orlonger),
dependingonroomtemperatureandnumberoftimesthefreezer
doorisopened.Afterthefreezeriscooled,thecompressorwillturn
onandoffasneededtokeepthefreezeratthepropertemperature.
Theoutsideofyourfreezermayfeelwarm.Thisisnormal.The
freezer'sdesignandmainfunctionistoremoveheatfrompackages
andairspaceinsidethefreezer.Theheatistransferredtotheroom
air,makingtheoutsideofthefreezerfeelwarm.
AdjustingControl
Ifyouneedtoadjustthetemperatureinthefreezercompartment,press
theTEMPSETTINGbuttontodisplaythedesiredtemperaturesetting
fromthesnowflakeontheleft(leastcold)tothesnowflakeontheright
(coldest).
NOTE:Exceptwhenstartingthefreezer,donotadjustthecontrolmore
thanonesettingatatime.Wait24hoursbetweenadjustmentsforthe
temperaturetostabilize.
Cooling On/Off
Your freezer will not cool when cooling is turned off.
To turn cooling off, press and hold the TEMP SETTING button for
3 seconds. In the off condition, none of the lights on the control panel
will be illuminated. The main freezer light bulb will still operate.
To turn cooling on, press and hold the TEMP SETTING button for
3 seconds. When cooling is on, the control panel lights will be
illuminated.
Fast Freeze
Use this feature before adding large amounts of unfrozen food. For the
best food quality, do not exceed 3 Ibs (1,361 g) per cu. ft (28.32 L) of
freezer space.
To activate Fast Freeze, press the TEMP SETTING button until all the
snowflake positions are illuminated simultaneously.
The freezer will remain in the Fast Freeze setting for 24 hours after the
extra-low temperature is reached. Once the time has expired, the
freezer will return to the previous temperature setting. Fast Freeze may
be manually turned off by pressing the TEMP SETTING button to select
the desired temperature setting from the snowflake on the left (least
cold) to the snowflake on the right (coldest).
Over Temperature Alert (on some models)
The Over Temperature Alert lets you know if the freezer temperature
has risen to 19°F (-7°C) or higher. This alert feature will sound a
continuous alert tone and repeatedly flash a red light on the control
panel. The tone can be turned off by pressing the TEMP SETTING
button on the control panel once. As you press the TEMP SETTING
button, the red light will then also change from flashing to continuously
illuminated. The red light will remain illuminated until the freezer
temperature falls below 19°F (-7°C).
NOTE: If the red light on the control panel is repeatedly flashing, but the
alert tone is not sounding, this means that an over temperature
condition has occurred but the freezer temperature has since returned
to below 19°F (-7°C). To turn off the red light indicator for this condition,
press the TEMP SETTING button on the control panel once.
Door Ajar Alarm (on some models)
The Door Ajar alarm lets you know when the freezer door has been
open for 5 minutes or longer and the cooling is turned on. This alarm
feature will sound an alert tone that will repeat every 2 minutes. Close
the door to turn off the tone. The feature is reset and will reactivate
when the door is again left open for 5 minutes.
NOTE: To mute the alert tone while keeping the door open, such as
while cleaning the inside of the freezer, press TEMP SETTING button
on the control panel. The alert tone will be temporarily turned off.
Key IEieot Look (on sore÷ it"node,s)
To lock or unlock the freezer, you must hold the key in the lock while
turning. The lock is spring loaded, so the key cannot be left in the lock.
If the key is lost, contact your dealer for a replacement. Always give the
model and serial number of your freezer when requesting a
replacement key.
NOTE: Keep the key out of the reach of children. Do not keep the key
close to the freezer/refrigerator.
Ill)coMaker (on some mode_s)
To Turn the Ice Maker On/Off
NOTE: Do not force the wire shutoff arm up or down.
• To turn the ice maker on, simply lower the wire shutoff arm.
NOTE: Your ice maker has an automatic shutoff. As ice is made,
the ice cubes fill the ice storage bin and the ice cubes will raise the
wire shutoff arm to the OFF (arm up) position.
• To manually turn the ice maker off, lift the wire shutoff arm to the
OFF (arm up) position and listen for the click to make sure the ice
maker will not continue to operate.
Ice Production Rate
The ice maker should produce approximately 7 to 9 batches of ice in a
24-hour period. If ice is not being made fast enough, press the TEMP
SETTING button to display the next colder setting. Wait 24 hours and, if
necessary, set the temperature control to the highest setting, waiting
24 hours between each increase.
Remember
• Allow 24 hours to produce the first batch of ice. Discard the first
three batches of ice produced.
• The quality of your ice will be only as good as the quality of the
water supplied to your ice maker. Avoid connecting the ice maker to
a softened water supply. Water softener chemicals (such as salt)
can damage parts of the ice maker and lead to poor quality ice. If a
softened water supply cannot be avoided, make sure the water
softener is operating properly and is well maintained.
• Do not store anything on top of the ice maker or in the ice storage
bin.
8
Loading ...
Loading ...
Loading ...