Loading ...
Loading ...
Loading ...
16
HAIKU® BY BIG ASS FANS | REV. C | 08/26/2020
MAINTENANCE AND CLEANING
Please take a few moments each year to perform the following preventative maintenance procedures on your fan to ensure its safe and
ecient operation.
Checking the Safety Cable, Hardware, and Wiring
☑ Check that the safety cable is properly installed by removing the canopy screws, sliding the canopy down the extension tube, and
examining the safety cable and hardware.
☑ Make sure the mounting hardware and the fasteners securing the airfoils to the fan hub are securely fastened.
☑ Make sure the wire connectors are secure and the ground wire is securely connected.
Cleaning the Airfoils
Dust the airfoils regularly. If the fan becomes dirty, clean it with a damp cloth and ordinary soap and water. Do not use solvents, gasoline,
or any other chemical cleaners! These may cause surface distortion and damage to the fan.
Polished Airfoils
Apply a cleaning product appropriate for stainless steel surfaces, such as Pledge
®
Multi Surface Cleaner, and wipe with a microfiber
cloth. Please wear the provided gloves when you are handling the airfoils to avoid smudges and fingerprints.
Cleaning the Light
Lights with lens: Clean the light's lens periodically to ensure optimal performance. Wipe the lens with a clean, damp cloth and allow
to dry thoroughly. If necessary, use a mild soap or a gentle liquid cleaner. Do not clean the light or lens with scouring pads, alkaline
cleaning substances, gasoline, thinner, benzene, heating oil, or polishing powder.
Lights without lens: Clean the LEDs periodically to ensure optimal performance. Use a compressed air duster to remove dust and debris
from the LEDs. Do not touch the LEDs while cleaning. Hold the duster can upright when using.