Loading ...
Loading ...
Loading ...
23
For safety reasons, if the hopper has not been locked into place, the appliance will not operate.
Refer to manual for assembly instrucons or consult with your Customer Service Center for addi-
onal assistance.
Refer to page 17 of the manual and follow the guideline for using the [REV] buon.
If the issue is not resolved aer following the above process, please contact your local Customer
Service Center.
Put the control lever in half-closed (
) posion, and press [ON] buon to release residue. Press
[REV] buon for 3-5 seconds then stop. Repeat this process 2 to 3 mes.
Press [REV] buon to push the ingredients back up the hopper chute.
Please contact your local Customer Service Center for assistance.
If the amount of ingredients inserted is too much compared to the amount coming out of the pulp
outlet, the packing becomes slightly pushed away creang a gap, so the juice leaks out. Do not put
too many ingredients in by force, but gradually when extracng.
These are completely normal “molding marks” resulng from the manufacturing process. There
are no problems for use.
Depending on the texture of the ingredient, there may be slight shaking as the squeezing screw ro-
tates. This is a normal phenomenon and is not a malfuncon. Firm ingredients (e.g. carrot, potato,
radish, beet, etc.) may cause more shaking than soer ingredients.
If the control lever is in the position, the chamber set will not fit onto the body. Before
assembling the chamber set, make sure that the control lever is in the
position.
Loading ...