Loading ...
Loading ...
Loading ...
DRYER USE
/
/
AUTO DRY
_IATtlSWETO CYCLES 14
DAr_I>O O MORE NORMAL
[oo[ DO,VNo o
0 LESS
cm _EsD_¥O @ JEANS_
WlINKL_(iu_ o
AUTO DRY
CHE_II_4SC 0 LEVEL
PRESS& H01D 3 BULKY / BEDDIN
C0r_lR0[LOCKDO s CONDS[0 LOCK/
UN£OCKCONTRq
DELICATE
CASUAL _ MANUAL ES]IM#_D
=_ CYCLES B_F REr_9_<U
IMED DRY
START EXPRESS DRY _! E TME
H E_3JY DUlY
OPTIONS MODIFIERS
O HIGH
@ MEDIUM HiGH
@ MEDIUM
O LOW
DAMP DRY SIGNAL
(ALIIOCY( SONIY ] _ EXTRA LOW
• AIR DRY
WRINKLE GUARD TEMPERATURE
(CA UA_C_CtSO_L_)
\
• HIGH
e LOW
@ OFF
END of CYCLE SIGNAL
Expmosion Hazard
Keep flammabme materiams and vapors_ such as
gasomine, away from dryer.
Do not dry anything that has ever had anything
flammabBe on it (even after washing).
Failure to follow these instructions can resumt in death,
expmosion, or fire.
Fire Hazard
No washer can comp(etemy remove oil
Do not dry anything that has ever had any type of oil on
it (including cooking oils).
Items containing foam, rubber, or plastic must be dried
on a clothesline or by using an Air Cycme.
Failure to follow these instructions can resumt in death
or fire.
Follow these basic steps to start your dryer. Please refer to
specific sections of this manual for more detailed information.
1. Clean lint screen before or after each cycle. See "Cleaning
the Lint Screen."
2. Place laundryin dryer and shut door. See "Loading."
3. Press the selected cycle pad. The preset settings for Auto Dry
Cycles or Manual Cycles will glow. The estimated or actual
cycle time (in minutes) will show in the display.
To use an Auto Dry Cycle
• Select an Auto Dry Cycle.
• Select AUTO DRY LEVEL to adjust how dry you want the
load. As the cycle runs, the control senses the dryness of
the load and adjusts the time automatically for the
selected dryness level.
Select the desired Options.
make changes during an Auto Dry Cycle:
To
Press PAUSE/CANCEL
Adjust Auto Dry Level and/or Options.
NOTE: Auto Dry Level selections can be made only while
using Auto Dry Cycles. You can select a different dryness
level, depending on your load, by pressing Auto Dry Level
and choosing More or Less. Selecting More or Less
automatically adjusts the sensed time needed.
Q MORE
@
@ LESS
C)
AUtO DRY
LEVEL
PRSS & HOLD 3
SECONDS TO LOCK [
UNI OCK CON [ROI
15
Loading ...
Loading ...
Loading ...