Loading ...
Loading ...
Loading ...
– 13 –
8. PREPARING THE BANDSAW
Note: Remove the plug from the socket before
carrying out adjustment, servicing or maintenance.
8.1 INSTALLING THE TABLE – FIG. 1
Pull the table (10) onto the cradle/table tilt
adjustment (17) ensure the holes on the underside
are lined up, using the pan head screws (35) and
washers (36) secure the table in place.
8.2 LEVELLING THE TABLE –
FIGS. 2 – 3
The saw table can be tilted up to 45°. To tilt,
loosen the wing nut (17.1) on the cradle. A stop
on the underside of the table rests on the lower
wheel housing (17.3) when the table is at 90°
with the blade.
Loosen the lock nut (17.2) and turn the bolt in
or out, as required, to change angle against the
saw band.
Use a spirit level to check the table is square.
8.3 RIP FENCE RAIL – FIG. 4
Place the rip fence rail (12) on the front edge of
the table and tighten in place with the four plastic
wing bolts (31).
FIG. 1
FIG. 2
(10)
(17.2)
(17)
FIG. 3
FIG. 4
(17.1)
(17.3)
(12)
(31)
Loading ...
Loading ...
Loading ...