Loading ...
Loading ...
Loading ...
roubleshoohng
PROBLEM POSSIBLE CAUSE WHAT TO DO
Burners spark
It is normal for all four
burners to spark when a
burner is turned on, but has
not yet ignited.
Continuous sparking may be
caused when:
No action is needed. Burner
operation is not affected and the
sparking should end when the knob
is moved from LITE.
--There is a faulty spark
module.
Contact service technician to replace
module.
--The wall outlet wiring is Contact a qualified electrician to
incorrect, correct wiring, if needed.
The surface You are not pushing in Push control knob(s) in before
burner controls before turning, turning to a setting.
will not turn
Cooling fan runs
dudng BAKE,
CONVECT
BAKE, CON-
VECT ROAST,
BROIL, CON-
VECT BROIL or
CLEAN
It is normal for the fan to
automatically run while the
oven is in use to cool the
electronic control.
The convection It is normal for the No action is needed.
fan does not convection fan to shut off
run all the time when the door is opened.
The Self- You have programmed a Wait for the start time to be reached,
Cleaning cycle delayed start time. or cancel and reset the control.
will not operate
An "F" code appears on the Call a service technician to repair.
display.
Odor from oven Heating of insulation. Odors are normal when the range is
new. The odors will disappear as the
oven is used.
continued on next page
31
Loading ...
Loading ...
Loading ...