Loading ...
Loading ...
Loading ...
Cleaning en-us
17
DCleaning
Cl eani ng
9 CAUTION!
AVOID DAMAGING THE APPLIANCE AND THE
FITTINGS.
■ Do not use abrasive, chloride or acidic
cleaning agents or solvents.
■ Do not use scouring or abrasive sponges.
The metallic surfaces may corrode.
■ Never clean the shelves or containers in the
dishwasher.
The parts may become deformed.
Cleaning the display
The change in temperature and humidity can cause
the controls to steam up.
Switch the clean lock on before cleaning.
~ "Clean lock" on page 13
Use a clean micro-fiber cloth for cleaning.
Cleaning the appliance interior
Proceed as follows:
1. Press the main On/Off switch.
2. Take out food and store in a cool location.
Place ice pack (if available) on the food.
3. Clean the appliance with a soft cloth, lukewarm
water and a little pH-neutral washing-up liquid.
9 CAUTION!
The rinsing water must not run into the light
or through the drainage hole into the
evaporation area.
4. Wipe door seal with clear water and dry
thoroughly with a cloth.
5. Switch appliance back on and put in food.
Cleaning the fittings
To clean, take the variable parts out of the
appliance.
~ "Interior fittings" on page 10
Care instructions for stainless steel
surfaces
When taking care of and cleaning stainless steel
surfaces, use only cleaning agents suitable for
stainless steel and a stainless steel cleaning cloth.
You can purchase a suitable stainless steel cleaning
cloth from customer service.
To prevent visible scratches, clean the stainless
steel surface in the direction of the structure.
lOdors
Odor s
If you experience unpleasant odors:
1. Pull out the mains plug or switch off the fuse.
2. Take all food out of the appliance.
3. Clean the inside.~ "Cleaning" on page 17
4. Clean all packaging.
5. Seal strong-smelling food in order to prevent
odors from forming.
6. Switch the appliance on again.
7. Store food in the appliance.
8. Check whether the formation of odors is still
occurring after 24 hours.
9. Change the odor filter.
~ Page 17
Changing the odor filter
Replacement filters are available from your customer
service.
1. Open the filter holder with a slotted screwdriver.
2. Remove the used odor filter and replace with a
new odor filter.
3. Close the filter holder.
Loading ...
Loading ...
Loading ...