Loading ...
ATTENTION!
Turn each bolt, by hand, until the screw grips into the mounting hole. Continue this process until all bolts have been
installed. After all components have been loosely assembled, tighten all hardware.
Tip: Always fully insert the hex key inside designated notch of the bolt.
If the hex key is not fully inside the notch, the hex key could slip out, causing damage
to the bolt head. Repeated hex key slipping will cause the notch to become rounded,
making it dicult or impossible to tighten the bolt with the hex key.
ASSEMBLY
Page 2 / 3 5/2021LG929
STEP 1
B: 6 D: 12
STEP 2
A: 6 D: 18
STEP 3
C: 1 D: 6
Align the holes on the straight
end of one Base Panel (B) over
the holes on the bent end of a
second base panel, as shown in
Fig. 1
Hand-tighten two Bolts (D) to
loosely secure the panels.
Repeat this step until the base
has been loosely assembled.
Align the holes on the straight
end of one Bowl Panel (A) over
the holes on the bent end of a
second bowl panel, as shown in
Fig. 2
Hand-tighten three Bolts (D) to
loosely secure the panels.
Repeat this step until the bowl
has been loosely assembled.
Ensuring the mounting holes
align, place Bottom Panel (C)
onto the assembled base, then
the assembled bowl onto the
bottom panel.
Hand-tighten six Bolts (D) to
loosely secure the components.
Evenly tighten all 36 bolts.
Loading ...