Loading ...
Loading ...
Loading ...
1. Press Phono button ( 23)
2. Set the speed selector (32) to the proper position depending on the record to be played.
3. Place the record on the platter (use the spindle adaptor (31) if required).
4. Lift the tone arm from the rest and slowly move it to the record side. The platter will being to
rotate.
5. Place the tone arm to the desired position of the record.
6. Adjust the volume to the desired level.
7. At the end of record, the platter will automatically stop rotating. Lift the tone arm from the
record and return it to the rest.
8. To stop manually, lift the tone arm from the record and return it to the rest.
Remark : as some kind of record the auto-stop area was out of the unit setting, so it will stop before the last track finish.
In this case, select the Auto-stop switch (33) to “ off “ position, then it will run to the end of the record but will not stop
automatically (turn off the unit by power button or switch back the auto-stop switch (33) to “ on “ position to stop the
platter rotate). Then put back the tone arm to the rest position.
Playing compact disc
Getting start
1. Press CD button (10).
2. Press CD tray open/close button (26) to open the CD tray.
3. Place a CD with the printed side facing up inside the tray.
4. Press the Disc skip button (22) to turning the CD tray and loading out the other disc compartment.
5. Press the CD tray open/close button (26) to close the CD door.
6. CD search is performing, the display will show the total number of disc, number of tracks & playing time of disc.
Noted : CD searching will be performed every time when switching to CD mode or closing the CD door. All CD
functions will be response only after the CD searching is completed (around 5 seconds).
Play / pause mode
1. Press the “Play/Pause” button (21) to start playback, the first track of the first disc will be played and the play
indicator will appear on the LCD display (2).
2. Or press Disc skip button (22), to select the desire tray disc.
3. To interrupt, press the “Play/Pause” button (21) once, and the display will start flashing. Press again to release &
resume playback.
Stop mode
1. If Stop button (8) is pressed during play or pause mode, system will go to stop mode.
Skip mode (skip up /skip down )
1. During play or pause mode, if Skip up button (27) is pressed it will go to next track and display the track no. and
then remain the play or pause mode.
2. During play or pause mode, if Skip Down button (12) is pressed. It will go back to the beginning of the track,
original track no. is display and remain the play or pause mode.
3. After step 2, press skip down button (12) again will go to the previous track and remain the play or pause mode.
Search mode (search up
/search down )
1. During play mode, if search up button (27) is pressed & hold for few seconds, it will start searching forward.
2. During play mode, if search down button (12) is pressed & hold for few seconds. It will star searching backwards.
Repeat play
This function allow to repeat 1 single track, 1 single disc or all discs:-
Press the Repeat button (28) repeatedly to switch the function:-
REPEAT All DISC
REPEAT 1 DISC REPEAT ONE
Note : Single track repeat function is possible in normal or programmed playback, repeat one disc or all discs is only
available in normal playback.
Random play
You can listen all the tacks of all available discs in a random order by this function
1. Press Random button (13) once, unit will play all disc randomly ; press again, unit will play 1 disc randomly.
2. Press “play/pause” button to start random playback.
3. All tracks of all discs or all tracks of 1 disc will be started playback in random order.
4. Press “random” button again to cancel random mode.
CD programming
Up to 60 tacks can be programmed to be programmed to be played in any required order from one CD or all CDs in the
CD changer.
3
Loading ...
Loading ...
Loading ...