Loading ...
Loading ...
Loading ...
Remove packaging
Place mounting bracket against the wall, line up with the centerline and rest on top of backsplash.
Use M3.5x30mm self-tapping screws to fix bracket to the wall through the holes at top, middle, bottom
of mounting bracket (4x at top, 4x in middle, 4x at bottom)
NOTE: Make sure screws are installed in vertical studs as much as possible
Centerline
Bracket mounting holes
Bracket mounting holes
Bracket mounting holes
Top of back splash
INSTALL WARMING SHELF TO THE HOOD
• Install 2x M4x8mm self-tapping screws into "D" holes at the
bottom of the hood flange, leaving a gap of 1/8”.
• Remove shelf packaging and protective film (if any).
• Attach the warming shelf to the bottom of hood by inserting
the top of the self-tapping screws into the keyhole slots on
the top of the shelf. Slide the shelf towards the left to lock it
into place.
• Tighten 2x M4x10mm screws & washers through the
bottom of the shelf into the hood flange in the “E”
position
INSTALL HOOD ONTO WALL
SKIP THIS STEP IF INSTALLING BENEATH A SOFFIT OR CABINET
Install outlet adapter onto top of hood
IMPORTANT: Check that the damper moves freely
Loading ...
Loading ...
Loading ...