Loading ...
Loading ...
Loading ...
Air Conditioner Features
(continued)
TO TURN UNIT ON:
F
NOTE: The following instructions represent the Unit Controls, the same
instructions can be used for the Remote Control,
YOU WILL SEE:
TO CHANGE TEMPERATURE
SETTING:
_i___'_,_,,_:_,,_i_',___,
© ©
¸
\ /
DO THIS:
PRESS TO
RAISE
PRESS TO
LOWER
YOU WILL SEE:
_i;_¸_.......
©
....%_J_ii_ii_i_
l
Note: Tap or hold either up( A ) or down( V ) button until the
desired temperature is seen on the display. This temperature
will be automatically maintained anywhere between 60°F (16°C)
and 90°F (32°C). If you want the display to read the actual
room temperature. See "To Operate on Fan Only" section on
Page 7.
TO ADJUST FAN SPEEDS:
DO THIS:
PRESS TO
SELECT:
FASTER
SLOWER
YOU WILL SEE:
© ©
_' _':_iii!iJ:ili!¸¸ _
\ J
A 2 Digit DispIay is used to indicate the Fan Speed setting,
from 10 through 99. When the "SLOWER" button is pressed
the motor speed will slow down at multiple intervals (90 distinct
settings), to a minimum setting of 10. To speed the motor up,
press the "FASTER" button. The speed will increase at multipIe
intervals to a maximum setting of 99. After 5 seconds the control
wilI automatically change back to displaying the set temperature.
SZ000400(En)-Yaokong 6 12/10/2004, 5:36 PM
Loading ...
Loading ...
Loading ...