Loading ...
Loading ...
Loading ...
COOKTOP USE
Fire Hazard
Turn off all controls when done cooking.
Failure to do so can result in death or fire.
The control knobs can be set anywhere between HI and OFR
Push in and turn to setting. The surface cooking area Iocator
shows which element is turned on. Use the following chart as a
guide when setting heat levels.
SETTING RECOMMENDED USE
HI • Start food cooking.
• Bring liquid to a boil.
6-8 • Hold a rapid boil.
[MED- HI] • Quickly brown or sear food.
5 • Maintain a slow boil.
[MED] • Fry or saut_ foods.
• Cook soups, sauces and gravies.
2-4 • Stew or steam food.
[MED- LO] • Simmer.
LO • Keep food warm.
SURESIMMER TM
LO
• For a low simmer or when using
lids.
• Melt chocolate or butter.
4 • For a high simmer or when
simmering without lids.
I
REMEMBER: When range is in use or (on some
models) during the Self-Cleaning cycle, the entire
cooktop area may become hot.
COOKTOP ON Light
The COOKTOP ON indicator light is located on the right side of
the control panel. The light will glow when any surface control
knob is turned on.
The indicator light will go off when all control knobs have been
turned off, even when one or more surface cooking areas are still
hot.
000 ooe
O • o o
1 o
!. COOKTOP ON light
EASYGLANCE TM Hot Surface Indicator Light
The Hot Surface Indicator light is located above the control knob.
Unlike the COOKTOP ON Light, the Easy Glance hot surface
indicator light will glow as long as any surface cooking area is too
hot to touch, even after the surface cooking area(s) is turned off.
oo_ 1
0 0
©
1. EASYGLANCE Hot Surface Indicator Light
C oK ,®p Locko : t
The Cooktop Lockout prevents unintended use of the surface
cooking areas. When the cooktop is locked out, the surface
cooking areas cannot be turned on by the control knobs.
The cooktop will remain locked after a power failure if it was
locked before the power failure.
To Lock/Unlock Cooktop:
Before using, turn all control knobs to OFF. Press and hold the
TOP keypad for 5 seconds until a single tone and "Loc on" will
appear on the display. After 5 seconds, "Loc On" will disappear
from the display, and a picture of the cooktop will appear.
Repeat steps above to unlock cooktop. "Loc OFF" will appear on
the display for 5 seconds and the picture of the cooktop will
disappear from the display.
The surface cooking area will glow red when an element is on. It
will cycle on and off, at all settings, to maintain the selected heat
level.
Wiping off the cooktop before and after each use will help keep it
I free from stains and provide the most even heating. For more
information, see "General Cleaning" section.
• Do not store jars or cans above the cooktop. Dropping a
heavy or hard object on the cooktop could crack it.
• Do not leave a hot lid on the cooktop. As the cooktop cools,
air can become trapped between the lid and the cooktop,
and the ceramic glass could break when the lid is removed.
• Clean up sugary spills and soils as soon as hot surface
indicator light goes off. If not wiped up while warm, surface
pitting can occur.
8
Loading ...
Loading ...
Loading ...