Loading ...
Loading ...
Loading ...
Installation and Mounting Instruction
Before beginning the installation of your new Solar Powered Roof Exhaust Fan,
please read through the entire installation instructions and contact us if you
have any questions.
Tools Required:
• Ladder
• Reciprocating saw (or jig saw)
• Power drill with a 1/2” – 1” drill bit
• 1” – 2” deck screw and screw bit
• Hammer & roofing nails (or self tapping galvanized screws)
• Caulk gun with waterproof roofing sealant
• Measuring tape
• Permanent marker (or chalk / crayon)
• Roofing knife (or box cutter)
• Flat pry bar
8 Steps Installation Instruction
It is advised that you prepare the mounting hole prior to bringing the fan up on
the roof. Always secure the fan on the roof to avoid injury or having the fan
slide off the roof and get damaged
Step 1 - Ventilation Clearance
To maximize the solar fan’s effectiveness, you’re suggested to remove or
block any existing rooftop static vents and ridge vents. If there is already a
turbine type vent, simply remove the old vent and use the same hole for the
new installation, or block it completely. (Fig. 1)
* Make sure you have proper intake ventilation at the eave or fascia. Use
a ratio of 1 sq. ft. of intake ventilation for every 600 sq. ft. of attic space.
4 | P a g e
Loading ...
Loading ...
Loading ...