Loading ...
Loading ...
Loading ...
TO REMOVE BELT
\
1, Turn Power-
Mate ® upside
down.
2. Unscrew the
two (2) Power-
Mate ® cover
screws.
3. Turn Power-
Mate ® right _
side up. Press _ff_._'_.._._._\._._._f_
handle release _ _ _,. ,_-_-_"_.
pedal and _-_"__'/. _:--_
lower the \'=_ \ /_'_
swivel. Lift rear \ V
latches up, Side ear
Latch Latches
4. To remove cover,
grasp the sides and
pull out.
5. Lift agitator
assembly out
and remove
worn belt.
EndCap
6. Check and clean end cap areas. See
AGITATOR ASSEMBLY for picture of
complete agitator assembly.
TO CLEAN AGITATOR:
NOTE: In order to keep cleaning efficiency
high and to prevent damage to your vacu-
um, _h_ aaitator must be cleaned every time
the belt is changed.
The agitator must also be cleaned accord-
ing to the following schedule:
Vacuum Use Clean Aaitator
HEAVY -
(used daily)
MODERATE -
(used 2-3 times/week)
UGHT -
(used 1 time/week}
every week
every month
every 2 months
IMPORTANT
Disconnectcleaner fromelec_ical outlet.
Check and remove hair,stringand lint build-
up frequentlyin the Power-Mate'='agitator
and end cap areas.
Remove any dirt or debris in the belt path
area or in the brush roller area.
Carefully remove any string or debris
located on the agitator, or end caps,
AgitatorAssembly
Brush Unit
18
Loading ...
Loading ...
Loading ...