Koldfront WAC8001W Owner’s Manual

Loading ...

Installing Cabinet into Window

Follow the steps listed below to install the cabinet into the window.

1. Center empty cabinet into window:

• Check that lower rail of air conditioner cabinet is behind and against back side of window

sill.

• Maintain a firm hold on the cabinet and lower window sash to hold the cabinet in place.

• Measure the distance of the right side and left and adjust until equal distance.

2. There are different methods to secure the cabinet into window depending on the type of

window.

• For Wooden Frames:

- Use a 3/16” drill bit to drill three starter holes 3/8” deep through the three holes in the

cabinet and into the window sill.

- Drill one starter hole 3/8” deep through the hole in the middle of the top rail and into the

window frame.

• For Vinyl Windows:

- Use a 1/8” drill bit to drill one hole through the hole in the middle of the top rail into the

window frame. Attach the cabinet to the window with one #10 x ¾” Phillips screw (B in

figure above).

- Place two safety locks into the holes that are located at the bottom of the cabinet and

drive two locking screws through the safety locks into the cabinet as shown below:

Note: When choosing your window make sure the power supply cord is within 4 feet of a

grounded 3-prong outlet.

A. #10 x ¾” Phillips

Screw

B. Safety Locks (Only

for Vinyl Windows)

A. #10 x ½” Phillips

Screws

B. #10 x ¾” Flat

Screws

C. Window Sill

Loading ...

Koldfront WAC8001W 8,000 BTU Window Air Conditioner with 3,500 BTU Heater and Remote