Loading ...
Loading ...
Loading ...
6
STERILIZING SMALL PARTS
CAUTION: Always unplug the warmer before lling.
The sterilize feature can be used for any small part safe for steam sterilization. DO NOT
sterilize bottles in this sterilizer.
1. Add 2 oz / 60 mL of DISTILLED water directly into the Warming Chamber. Do not
overll, as overlling may cause damage to the unit.
2. Place small parts (nipples/teats, paciers/soothers, etc.) to be sterilized in the
Lift-Out Basket.
3. Place the Lift-Out Basket with small parts into the Warming Chamber.
4. Place the Adapter Ring on top of the Warming Chamber.
5. Place the Sterilizing Lid on top of the Adapter Ring.
6. Plug in the power cord and press the Power Button. The Indicator Light will turn on,
indicating the sterilizing cycle has begun.
WARNING: DO NOT open Sterilizing Lid or reach over the appliance while in
use, as steam will cause burns and serious injuries. Do not touch hot surfaces
during or immediately after use.
7. When the Indicator Light turns o, the sterilizing cycle is done.
8. Allow the unit to cool for at least 10 minutes before removing the Sterilizing Lid,
Adapter Ring, and Lift-Out Basket.
CAUTION: Be sure to observe the 10-minute cooling time as warmer
parts and sterilized parts will be hot. Always remove the Sterilizing Lid
carefully by the handle. Take care when removing the Sterilizing Lid as there
may be some residual steam—keep hands and face away. Allow the steam to
clear before reaching into the unit. Always retrieve the sterilized parts by
removing the Lift-Out Basket.
1
4
7
2
5
8
10
3
6
Loading ...
Loading ...
Loading ...