Loading ...
Loading ...
Loading ...
9
Installation
English
5. Install the fireplace into the cut out
area and secure with 4 mounting
screws supplied. (Fig. 8)
Fig. 8
6. Align the six tabs on back of the glass
cover with the slots on the fireplace
and reattach the glass cover to the
fireplace. (Fig. 9)
Fig. 9
7. Do not block the ventilation areas.
(Fig. 10)
Fig. 10
Residential Installation
CAUTION: When installing this fireplace
in residential applications, ensure to
leave 3 feet minimum from any object.
RV Installation
WARNING: When installing this fireplace
in RV applications, ensure hot air will
not directly blow onto soft furnishings or
combustible materials during operation.
For fireplace installation in RV slide
out wall, we recommend you connect
the slide out safety cut off wires to the
slide out 12V DC activation system. This
system will prevent operation while
traveling and in storage mode. Do not
operate the fireplace when slide out is in
the stowed position.
NOTE: This fireplace is fitted with a
proximity sensor and thermal cutoff
for your safety. When fireplace is in
operation and objects are placed within
6 inches or less the fireplace will
automatically shut off and a red LED will
flash. Remove the object and cycle the
fireplace power switch to reset. Check
for interference from other electrical
product remotes that may affect
fireplace operations.
Do not install the fireplace insert
directly on carpet or similar surfaces
which may restrict airflow.
CAUTION: If installing the fireplace in a
carpeted area, place a one-piece solid,
flat surface under the fireplace.
Loading ...
Loading ...
Loading ...