Loading ...
Loading ...
Loading ...
6
Installation instructions
4. Installation
Your Fisher & Paykel Active Smart™ refrigerator is fitted
with front and rear rollers, designed for moving the
product in the forwards and backwards direction.
Avoid moving the product in a sideways direction as this
may damage the rollers or the floor covering/surface.
A
Your refrigerator will arrive with the front feet wound up
making moving the product into its final location a simple task.
B
Roll the refrigerator into its final position making sure there is the correct air gap between the
product and surrounding cabinetry. See minimum clearance in cabinetry dimensions table (refer
to page 5).
5. What to do if your product is unstable
C
Gently push the refrigerator back until the rear rollers
contact the floor.
Measure the gap under the front foot, which has come off
the floor.
Obtain some solid packing material (hardwood, plastic, etc)
which fits firmly into the gap under the foot.
Note: do not use metallic materials that may corrode, stain
and/or damage floor coverings.
D
Wind both front feet up and roll the product out of position.
Place the packing material in the location diagonally
opposite the front roller that lifts off the floor.
Make sure the packing material stays in place when the
product is pushed back into position.
Ideally, the packing material is large enough to rest against
the back wall so as to prevent it moving when the cabinet is
pushed into position.
Wall behind refrigerator
For example: if this foot lifts off
the floor when pushing gently on
the top front of the refrigerator
Packing material goes under rear roller
diagonally opposite front foot that lifts
Fig.3 Stabilising your refrigerator
This foot lifts off the floor when
top front is gently pushed back
Example only
Unlevel floor
Fig.2 Unstable refrigerator
Lower the front
of the refrigerator
Fig.1 Refrigerator feet
Raise the front of
the refrigerator
Loading ...
Loading ...
Loading ...