Loading ...
Loading ...
Loading ...
First Steps
3. Attach toe grille to cabinet.
or
some models
To level the cabinet using the front rollers:
1 Remove the toe grille.
2 Use a flat-blade screwdriver or 3/8
inch socket wrench to raise or lower
the front rollers (Figure 2).
!ii i!iill
i iiii
Figure 2
or
Use adjustable wrench to adjust leveling
screws. Lower the leveling screws on each
side clockwise until they contact the floor
(Figure 3).
Raise
Figure 3
NOTE
Raise the front of the refrigerator enough
so the doors close freely when opened
halfway. The refrigerator should slope t/4
inch to 1/2 inch from front-to-bacl<. Then
level the refrigerator from side-to-side.
4 Some models are equipped with an anti-
tip bracket (Figure 4). Lower it clockwise
until it contacts the floor.
Figure 4 (some models)
_ WARNING
The anti=tip device must be
installed according to the
instructions in your Use &
Care Manuel. Failure to do
so will result in in'ur .
_ WARNING
When reversing the door swing:
You MUST move the anti=tip bracket
to align with the hinges of the door.
Failure to do so wiii result in injury.
Loading ...
Loading ...
Loading ...