Loading ...
Loading ...
Loading ...
INSTALL SEAT
1. Remove bolt and flat washer securing
seat to cardboard packing and set
aside for assembly of seat to tractor.
Remove the cardboard packing and
discard.
2, Connect switch to seat.
3. Place seat on seat pan so all three (3)
bottom pads are positioned over large
slotted holes in pan.
Slot
Pad_...
Flat
washer
Tape
Seat
pan
Adjustment
Bolt Tab handle
/ Wiring harness
VERIFIQUE LA BATERIA
1. Levante la base del asiento a la posici6n
levantada.
AVlSO: Si esta bateria esta utilizada despues
del mes y abe indicado sobre la etiqueta (la
etiqueta que se encuentra entre los terminales),
cargue la bateria per un minimo de una hera
a 6-10 amps. (Vea "Bateria" en la secci6n de
Mantenimento de este manual).
4. Push down on seat to engage pads in
slots and pull seat towards rear of trac-
tor.
5. Raise seat and tighten bolt securely.
6. Remove tape and discard.
7. Lower seat into operating position and
sit on seat. Press clutch/brake pedal all
the way down. If operating position is
not comfortable, adjust seat.
To adjust seat: Grasp adjustment handle
and pull up, slide seat to desired position
and release adjustment handle.
40
Loading ...
Loading ...
Loading ...