GE - General Electric JGSP32GEV2BB GE gas slide-in range

User Manual - Page 37

For JGSP32GEV2BB.

PDF File Manual, 40 pages, Download pdf file

Loading ...
Loading ...
Loading ...
AOBLEM
FOOD DOES NOT ROAST
OR BAKE PROPERLY
OVEN TEMPERATURE
TOO HOT OR TOO COLD
OVEN CONTROL SIGNAL!
AFTER ENTERING COOK
TIME OR STOP TIME
OVEN WILL NOT WORK
BUT COOKTOP DOES
OVEN NOT CLEAN
AFTER CLEAN CYCLE
STRONGODOR
OVEN LIGHT DOES
NOT COME ON
OVEN WILL NOT
SELF-CLEAN
"'BURNING" OR "OILY'"
ODOR EMITrlNG FROM
OVEN WHEN TURNED ON
FANNOISE
CLOCK AND TIMER
DO NOT WORK
POSSIBLE CAUSE
The oven controls are not properly set• See the Baking or Roasting section.
Shelf position is incorrect.
Improper cookware is being used.
Oven thermostat needs adjustment• See the Adjust the Oven Thermostat n
Do It Yourself section.
Clock not set correctly.
Aluminum foil used improperly in the oven.
Oven bottom not securely seated in position.
Oven thermostat needs adjustment. See the Adjust the Oven Thermostat--
Do It Yourself section.
This is reminding you to enter a bake temperature.
Oven shut off valveis in closed position. Locate oven shut off valve on pressure
regulator of self-cleaning oven. Move shut off lever to open position.
Oven controls not set properly.
Heavily soiled ovens require 3'/-,to 4-hour clean time.
Heavy spillovers should be cleaned up before starting clean cycle.
An odor from the insulation around the inside of the oven is normal for the
first few times the oven is used. This is temporary.
Improper air/gas ratio in oven. Call for service.
Bulb may be kmse or burned oat.
Electrical plug must be plugged into a livepower outlet.
Switch operating oven light is broken. Call for service.
Stop time must be at least 3 hours later than start time.
Oven temperature is too high to set self-clean operation. Allow the range to
cool to r_mmtemperature and reset controls.
This is normal in a new oven and will disappear in time. To speed the process.
set a self-clean cycle for a minimum of 3 hours. See the Operating the Self-
Cleaning Oven section.
A fan may automatically turn on and off to cool internal parts. This is normal
and the fan may continue to run after the oven is turned off.
Make sure the electrical plug is plugged into a live, properly grounded
power outlet.
Check for power outage.
See the Oven Control, Clock and Timer section.
If you need more help.., call, toll
GE Answer Center'
800.626.2000
consumer information service
free:
37
Loading ...
Loading ...
Loading ...