Sencor SCB 6150SS-EUE3 Food Chopper

User Manual - Page 5

For SCB 6150SS-EUE3.

PDF File Manual, 6 pages, Read Online | Download pdf file

SCB 6150SS-EUE3 photo
Loading ...
Loading ...
Loading ...
- 5 -
12/2019
Copyright © 2019, Fast ČR, a.s.
EN
Food Chopper
User'smanual
Prior to using this appliance, please read the usersmanual thoroughly,
even in cases, when one has already familiarised themselves with previous
use of similar types of appliances. Only use the appliance in the manner
described in this user’smanual. Keep this user’smanual in asafe place
where it can be easily retrieved for future use.
We recommend saving the original cardboard box, packaging material,
purchase receipt and responsibility statement of the vendor or warranty
card for at least the duration of the legal liability for unsatisfactory
performance or quality. In the event of transportation, we recommend
that you pack the appliance in the original box from the manufacturer.
DESCRIPTION OF THE APPLIANCE
A1 Pulse button
it is used to turn the motor
unit on and off.
A2 Motor unit
A3 Lid
A4 Blade assembly
with four titanium coated
chopping blades
A5 1.5-litre glass bowl
A6 Anti-slip ring
A7 Whipping disc
It is used for making
homemade mayonnaise,
whipping egg whites, cream,
etc.
BEFORE FIRST USE
Take the appliance and its accessories out of the packaging materials.
Wash the lid A3, blade assembly A4, whipping disc A7, bowl A5 and anti-
slip ring A6 in warm water with neutral kitchen detergent. Then rinse with
clean water and allow it to dry naturally or dry it out using awiping cloth.
Note:
The parts listed above, excluding the blade assembly A4, are
suitable for washing in adishwasher.
Attention:
When cleaning the blade assembly A4, be very careful
not to injure yourself on its sharp edges.
Never wash the motor unit A2 under running water or submerge it
in water.
ASSEMBLING AND DISASSEMBLING THE APPLIANCE
Before you start assembling or disassembling the appliance, check that
the motor unit A2 is turned off and disconnected from the power socket
and that the rotating parts have come to acomplete stop.
Place the anti-slip ring A6 on to adry, even and stable surface and put
the bowl A5 into it.
Now assemble the blade assembly A4. It consists of two parts, the top and
bottom chopping blades. Hold the top chopping blades by the middle
part and seat them on to the bottom blades from above, and then turn
them in one direction or the other so that both parts fit into each other.
For afirm connection of both parts, hold the bottom chopping blades
with one hand and use the other hand to hold the top chopping blades
and turn them anticlockwise until they lock into place.
Attention:
When handling the chopping blades, be very careful
not to injure yourself on their sharp cutting edges. Only
touch the plastic central part of the chopping blades.
Put the assembled blade assembly A4 on to the central pin at the bottom
of the bowl A5. If you wish to use the whipping disc A7, put it on the
central pin at the bottom of the bowl A5 instead of the blade assembly A4.
Cover the bowl A5 with the lid A3. The shape of the lid enables it to be
seated in only one direction. Push the lid A3 down so that it adheres to
the edge of the bowl A5 along its entire perimeter.
Put the motor unit A2 on to the lid A3 so that it fits in properly. Now the
appliance is assembled.
To disassemble proceed in the reverse sequence.
OPERATING THE APPLIANCE
Assemble the appliance according to the instructions in the chapter
Assembling and disassembling the appliance. Put the ingredients into
it after seating the blade assembly A4 or the whipping disc A7 on the
central pin at the bottom of the bowl A5. Do not fill the bowl A5 above
the maximum mark (1.5l).
Attention:
Certain foods, e.g. egg whites, cream, etc. increase in
volume when whipped. Do not fill the bowl A5 with
more ingredients than indicated in the Quick guide to
processing ingredients.
Connect the power cord to apower socket and press the pulse button A1
to start the appliance. Hold down button A1 for afew moments and then
release it. When the button A1 is released, the appliance will turn off. If
the food inside is not sufficiently chopped up, run the chopper again for
ashort time. Short pulse switching will limit excessive pulverisation of the
food. Hold the bowl A5 with one hand during operation. When using the
whipping disc A7, you may hold down button A1 for longer to ensure
that ingredients are whipped to the desired consistency.
Attention:
The maximum continuous operating time of the
appliance is 20 seconds. Then allow it to cool down
for 2 minutes.
If food sticks to the inside of the bowl A5, turn off the appliance and
disconnect it from the power socket. Make sure that the blade assembly
A4 has stopped rotating. Remove the motor unit A2 and the lid A3.
Clean the inside of the bowl A5 using aspatula. Assemble the appliance,
plug the power cord into apower socket and continue processing food.
After you finish using it, disconnect the power cord from the power
socket. Make sure that the rotating parts have stopped rotating. Remove
the motor unit A2 and the lid A3. First, carefully take the blade assembly
A4 or the whipping disc A7 out of the bowl A5 and only then empty
out its contents.
Then clean all used parts according to the instructions in chapter Cleaning
and maintenance.
QUICK GUIDE TO PROCESSING INGREDIENTS
CHOPPING BLADES
First, cut up the food into smaller cubes of approximately 2 × 2 cm and
only then process with the chopper. With vegetables like onion, it is
sufficient to cut them into quarters.
Ingredients Maximum load Total processing
time
Meat 450 g 20 s
Fruit and vegetables 300 g 15 s
Hard and semi-hard
cheeses
200 g 10 s
Nuts with shells
removed
150 g 15 s
Herbs 75 g 10 s
WHIPPING DISC
Ingredients Maximum load Total processing
time
Mayonnaise
(egg yolks, oil,
lemon juice, salt
and mustard)
500 g 20 s
Egg whites 4 pcs 2× 20 s
Whipping cream 500 g 3× 20 s
Loading ...