Loading ...
Loading ...
Loading ...
8
DOOR REMOVAL
9. Repeat steps 1-8 for the freezer door.
10. Lower the refrigerator door over the
bottom hinge pin and close the door.
11. Screw in and tighten the center hinge pin
using an adjustable wrench.
12. Lower the freezer door over the center
hinge pin and close door. Place the lower
hinge cover between the freezer door and
refrigerator door to keep it level while
attaching the top hinge (see Figure 8).
Door Bottom
A
B
C
Door Closer
Figure 7
Figure 8
4. Reverse the door handle (see DOOR HAN-
DLE INSTALLATION section if applicable).
5. Flip the refrigerator door over and remove
the screw from the door closer using a
Phillips screwdriver and set it aside (see
Figure 7A).
6. Pry out the hinge bearing from the door
with a straight screwdriver (see Figure 7B).
7. Install the bottom hinge bearing on the
opposite side of the door (see Figure 7C).
8. Flip the door closer over and install on the
opposite side of the door (see Figure 7C).
13. Attach the top hinge with the 3 screws using
a Phillips screwdriver or 5/16” wrench.
14. Tighten the top hinge screws and check
the door gasket for open seal condition
(see Figure 9).
15. Replace the upper hinge cover. Replace
the lower hinge covers.
Loading ...
Loading ...
Loading ...