Loading ...
Loading ...
Loading ...
Youcancustomizeyourcyclebyselectinganoption•
Seeoptionselections•Ifyouchangeyourmind,presstheoptionagaintoturnofftheoption,orselectadifferentoption•Youcanchange
anoptionanytimebeforetheselectedoptionbegins•
*Maximumwashtimesdependonwatertemperature,heavysoilcondition,dishloadsizeandoptionsselected•
OPTIONS DISH LOAD TYPES DESCRIPTIONS USE WITH:
...................._'_ Pans casseroles etcl Activates the PROSCRUB® spray jets and PrOVides Heaw Duty or Normal
ProScrub With tough food soil. intensified water spray to the back of the lower level rack. .....Wash Cycle ................
L,..,,_,,,,,,,,,,,,,,,,,,,,/ May add heat and time to the cycle.
Tosanitize your dishes and
glassware in accordance
with NSF/ANSI Standard
184 for Residential
Dishwashers•
Raises the water temperature in the final rinse to
approximately 155°F (68°C). This high temperature rinse
sanitizes your dishes and glassware in accordance with
NSF/ANSI Standard 184 for Residential Dishwashers•
Certified residential dishwashers are not intended for
licensed food establishments•
The Sanitize or Sani Rinse option adds heat and time to the
cycle•
Normal Wash cycle•
Heavy Duty cycle
automatically uses Sani
Rinse• Only these
sanitization cycles have
been designed to meet
the NSF/ANSI
requirements•
...................."/ Loads containing tough, increases the target water temperature during the wash Heaw Duty or Normal
Hi-Temp baked-on food. portions of the cycle, Wash CYC!es
_,,,_,_,_,_,_,_,_,_,_,_,_' dds heat, wash time and water to the CYC!el
For best drying results, dry
dishes with heat.
Turn OFF when loads contain plastic dinnerware that may be
sensitive to high temperatures•
This option with the use of rinse aid will provide the best
drying performance•
All cycles, except Rinse
Only. Automatic with all
wash cycles unless you
turn it off.
................... To rUnY0UidishWasher at Delays the start of a CYo!e up to 4 hour& All Cyclesl except Rinse
4H_'ayr a !ate[ t!me 9r dunng select a Washcycle and Options: Press 4 Hour De!ay. Press 0n!Y
...._, peaK nours
............... ! Start/Resume. C!ose the door firmly,
Control Lock Toavoid unintended use of To turn on Lock, press and hold Heat Dry for at least Anytime
your dishwasher, or cycle 4 seconds•
and option changes during
a cycle•
To turn off Lock, press and hold Heat Dry for at least
4 seconds•
When Control Lock is lit, all buttons are disabled• Ifyou press
any pad while your dishwasher is locked, the light flashes
3 times• The dishwasher door can be opened while the
controls are locked•
IMPORTANT: The sensor in your dishwasher monitors the soil level• Cycle time and/or water usage can vary as the sensor adjusts the
cycle for the best wash performance• If the incoming water is less than the recommended temperature or food soils are heavy, the cycle
will automatically compensate by adding time, heat and water as needed•
CONTROL PURPOSE COMMENTS
To start or resume a If the door is opened during a cYcle or the power is interrupted theStartiResume indicator
II wash cyc! e flashesi The cYC!e wi!l not resume unti! the door is closed and Sta_Resume is p!essed:
NOTE: If the Start/Resume button is located onthe top of door push door f rmly closed w thin
3 seconds of pressing Start/Resume.
To cancel wash
cycle
Close the door firmly• The dishwasher starts a 2-minute drain (if needed)• Let the dishwasher
drain completely•
e Washing TOfollow the The Clean indicator glows Whena cYcle is finished.
Drying
progress of your
.. ; . . If you select the Sani Rinse option when the Sani Rinse cycle is finished the Sanitized indicator
_ Clean a snwasner cyc e glows_ If your dishwasher did not properly sanitize your dishes the light flashes at the end of the
Sanitized
cycle, This can happen if the cycle is interrupted, or the water could not be heated to the required
Loading ...
Loading ...
Loading ...