Loading ...
Loading ...
Loading ...
Dryir_ Procedures
Follow fabric care label instructions.
j J-- ,
Place small items in a mesh bag.
Fill dryer drum 1/3 to 1/2 full.
• Follow the guidelines below for preparing the load for drying.
• Read the Qpezating znstzuctiG]s card for operating your specific model.
• Alw_ys read and followfabriccarelabelsand laundryprcchctlabels.
To reduce the risk of fire, electrical shock, or injury to persons, read
Ir_ztant Safety Ins_ions, pages 2-3, before operating this dryer,
l
items for dryir_.
• Dry items of similar fabric, weight and construction in the same load.
• Separate dark items from light-colored items. Separate items that shed lint
from those that attract lint. If an item sheds lint, turn it inside out.
Besurebuckles, buttons and trim are heatproofand won't damage the drum
finish. Closezippers,fasten hooks and Velcro®-Iike fasteners. Tiestringsand
sashesto prevent snagging and tangling.
Ifpossible, turn pockets inside out foreven drying.
Check for stains which may not havebeen removed in washing. Dryer heat
may permanently set some stains. Repeat stain removal process before
drying.
Placesmall items in a mesh bag to prevent tangling and for easyremoval.
Z Checkthatlint_ iscleanand inplace.
&
&
U_ad the d_yer.
• Theaverageloadwillfillthedruml/3tol/2full. ltemsneedroomtotumble
freely for even drying and lesswrinkling. Donot overload dryer.
• When drying large items, dryonly 2 or 3at atime, Fillout the loadwith small
and medium sized items,
Fordelicate or very small loads, add 2 lint-free towels for better drying, less
wrinkling, and to prevent grease stains caused by fabric softener sheets,
Donot overdry items. Overdrying cancausewrinkling, shrinkage, harshness,
and a build-up of static electricity, which can produce more lint.
If desired, add a dryer fabric softener sheet,
Close the dryer door and set dryer controls (sane models).
See Operating Instructicnscard for your specific model controls,
5 _ cycle selectcr clockwise to the des_ settir_.
6
mar_ t_e 4rim.
• PushStart Button for 2seconds orturn the STARTknob clockwise to ON, hold
for 1-2 seconds and release.
• Toadd or remove itemswhen the dryer isrunning, open the door. Thedryer
will always stop when the door isopened. Allow the drum to come to a
complete stop before reaching inside.
• To restart dryer, close the door then push the Start Button for 2 seconds or
turn the STARTknob clockwise to ON, hold for 1-2 seconds and release.
• The dryer will not start if the cycle selector is in the OFFposition,
7. When the cycle ends, rem3ve items im_=Jiately and hang
cr fold.If load is removed before the cycle ends, turn cycle selector to OFF,
Loading ...
Loading ...
Loading ...