Loading ...
Loading ...
Loading ...
6
ASSEMBLY
INSTRUCTIONS
1. Place motor base on a clean,
flat surface. Make sure the
motor base is unplugged from
the power outlet (not shown).
2. Close the pulp spout.
The cap will be securely
closed when you hear a click.
3. Place the juicing bowl by
lining up the fixed columns on
the juice container.
4. Insert the juicing bowl into the
fixed point of the housing.
5. Place the inner juice strainer
into the outer juice strainer,
together this is referred to as
the juice strainer assembly.
6. Insert the juicer strainer
assembly into the juicing bowl
aligning the 4 tabs on the
strainer with the grooves in
the bowl. This should fit firmly
in place.
7. Place the auger into the juice
strainer assembly by pressing
down firmly, so it nests
securely in place.
8. Install the cover onto the
juicing bowl. Line up the
arrow on the cover with the
unlock symbol on the bowl.
The cover should be seated
evenly on the juicing bowl.
Twist the cover clockwise until
locked in place.
9. Place the juice jug next to the
unit under the juice spout,
and place the pulp container
under the pulp spout.
10. Insert the food pusher into the
feed tube by aligning the
groove in the food pusher
with the small indent on the
inside of the feed chute.
1.
3.
5.
7.
9.
2.
6.
8.
10.
4.
Loading ...
Loading ...
Loading ...