Loading ...
Loading ...
Choosing a Sleeve
Select an earphone sleeve that provides the best fit and sound isolation. It
should be easy to insert, fit comfortably, and easy to remove.
Soft Flex Sleeves: In small, medium, and large
sizes. Made from pliable rubber.
Soft Foam Sleeves: Compress the foam sleeve
between your fingers and insert into the ear canal.
Hold in place for about ten seconds while the foam
expands.
Triple-Flange Sleeves:If desired, use scissors to
trim the stem on the sleeve.
Using the Remote
Use the remote to control compatible media phone players.
• Answer/End Call: Click the center button once.
• When answering calls speak in a normal manner.
• Answer/end calls on most phones by pressing the center button once.
Please read your mobile device's user guide for more information on how to
use the answer/end button, check for additional features, or to troubleshoot
usage problems.
NOTE: On some phones it might be necessary to adjust the volume when
switching from phone call to music.
For more information about compatible models go to: www.shure.com
Maintenance and Cleaning
Careful maintenance ensures a tight seal between the sleeve and nozzle,
improving sound quality and product safety.
• Keep the earphones and sleeves as clean and dry as possible.
• To clean sleeves, remove them from earphones, gently rinse in warm
water and air dry. Foam sleeves require a longer drying time. Inspect for
damage and replace if necessary. Ear sleeves must be completely dry
before reusing.
• Wipe the earphones and sleeves with mild antiseptic to avoid infections.
Do not use alcohol-based disinfectants.
• Do not expose earphones to extreme temperatures.
• Replace sleeves if they do not fit properly.
• Do not attempt to modify this product. Doing so will void the warranty
and could result in personal injury and/or product failure.
Cleaning the Earphone Nozzle
If you notice a change in sound quality, remove the sleeve and check the
nozzle of your earphone. If nozzle is blocked, clear obstruction by using wire
loop end of cleaning tool.
If no obstruction is found or if sound quality does not improve, replace the
sleeve with a new sleeve.
Cleaning Tool
Wire Loop
Caution: When cleaning, do not force any object through the earphone
nozzle! This will damage the earphone sound filter.
Warning: The cleaning tool is only to be used to clean the earphones. Any
other use, such as using the tool to clean ears or foam sleeve, could result
in injury.
The cable connectors to the earphones may collect debris or other deposits
that can affect audio quality. If this happens, disconnect the cables and clean
them using a dry cotton swab.
Specifications
Transducer Type
Single High-Definition MicroDriver
Sensitivity
at 1 kHz
107 dB SPL/mW
Shure IncorporatedSE215M Shure Earphones
3/42017/10/09
Loading ...